Woods Equipment TC60, TCR60, TCR68, TCR74, TC74 Introduction, Specifications, General Information

SPECIFICATIONS

	TC60 and TCR60	TC68 and TCR68	TC74 and TCR74
Tilling Width	60"	68"	74"
Maximum Tilling Depth	7-1/2"	7-1/2"	7-1/2"
Operating Weight	597 lbs/604 lbs (R)	634 lbs/641 lbs (R)	665 lbs/672 lbs (R)
Rotor Swing Diameter	17-1/2"	17-1/2"	17-1/2"
Number of Blade Flanges	7	8	9
Number of Blades	42	48	54
Drive Type	#80 Chain	#80 Chain	#80 Chain
Tractor PTO Speed	540 RPM	540 RPM	540 RPM
Rotor Speed	240 RPM	240 RPM	240 RPM
Tractor Hitch	Limited Category 1 &	Limited Category 1 &	Limited Category 1 &
	Category1	Category1	Category1
Tractor Horsepower	Up to 45 HP	UP to 45 HP	Up to 45 HP
Skid Shoe Adjustments	5 x 1"	5 x 1"	5 x 1"
Side-Shift Distance	15-1/2"	19-1/2"	22-1/2"
Gearbox Oil Capacity	1.2 QT SAE 80W-90	1.2 QT SAE 80W-90	1.2 QT SAE 80W-90
Chain Case Oil Capacity	.78 QT SAE #00 *	.78 QT SAE #00 *	.78 QT SAE #00 *

* Chain case #00 grease is factory installed

GENERAL INFORMATION

„Some illustrations in this manual show the equipment with safety shields removed to provide a better view. This equipment should never be operated with any necessary safety shielding removed.

The purpose of this manual is to assist you in operating and maintaining your rotary tiller. Read it carefully. It furnishes information and instructions that will help you achieve years of dependable performance. These instructions have been compiled from extensive field experience and engineering data. Some information

may be general in nature due to unknown and varying operating conditions. However, through experience and these instructions, you should be able to develop procedures suitable to your particular situation.

The illustrations and data used in this manual were cur- rent at the time of printing but, due to possible inline production changes, your machine may vary slightly in detail. We reserve the right to redesign and change the machines as may be necessary without notification.

Throughout this manual, references are made to right and left directions. These are determined by standing behind the equipment, facing the direction of the for- ward travel.

4Introduction

(Rev. 6/7/2011) MAN0813 (3/17/2010)