DEALER CHECK LISTS
PRE-DELIVERY CHECK LIST
(DEALER’S RESPONSIBILITY)
Inspect the equipment thoroughly after assembly to make sure it is set up properly before delivering it to the customer.
The following check list is a reminder of points to inspect. Check off each item as it is found satisfactory, corrections are made, or services are performed.
___ Check that all safety decals are installed and in good condition. Replace if damaged.
___ Check that all shields and guards are properly installed and in good condition. Replace if dam- aged.
___ Check all bolts to be sure they are properly torqued
___ Check and grease all lubrication points as identi- fied in the Lubrication Maintenance illustration, page 16.
___ Check the level of gearbox fluid before delivery. Service, if required, as specified on page 16.
___ Check that blades have been properly installed
DELIVERY CHECK LIST
(DEALER’S RESPONSIBILITY)
___ Show customer how to make adjustments and select proper PTO speed.
___ Instruct customer how to lubricate and explain importance of lubrication.
___ | Point out the safety decals. Explain their meaning |
| and the need to keep them in place and in good |
| condition. Emphasize the increased safety haz- |
| ards when instructions are not followed. |
___ | Point out all guards and shields. Explain their |
| importance and the safety hazards that exist |
| when not kept in place and in good condition. |
___ | Present Operator's Manual and request that cus- |
| tomer and all operators read it before operating |
| equipment. Point out the manual safety rules, |
| explain their meanings, and emphasize the |
| increased safety hazards that exist when safety |
| rules are not followed. |
___ | Explain to customer the potential crushing haz- |
| ards of going underneath raised equipment. |
| Instruct customer that service work does not |
| require going underneath unit and never to do so. |
___ | Explain to customer that when equipment is |
| transported on a road or highway, safety devices |
| should be used to give adequate warning to oper- |
| ators of other vehicles. |
___ | Inform customer to operate PTO at 540 rpm max- |
| imum. |
___ | Explain to customer the importance of having the |
| correct PTO driveline length so that it does not |
| bottom out or come apart. Explain that it must be |
| checked as instructed in the manual whenever |
| using a different tractor. |
___ | Show customer the safe, proper procedures to be |
| used when mounting, dismounting, and storing |
| equipment. |
26 Dealer Check Lists | MAN0813 (3/17/2010) |
|
