SAFETY RULES
ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!
MAINTENANCE
Before leaving operator's seat, lower lift arms and put attachment on the ground. Engage brake, stop engine, remove key, and remove seat belt.
NEVER GO UNDERNEATH EQUIPMENT. Never place any part of the body underneath equipment or between moveable parts even when the engine has been turned off. Hydraulic system
•Service work does not require going under- neath.
•Read Operator's Manual for service instruc- tions or have service performed by a qualified dealer.
Use a suitable lifting device of sufficient capac- ity. Use adequate personnel to handle heavy com- ponents.
Do not modify or alter or permit anyone else to modify or alter the equipment or any of its compo- nents in any way.
Your dealer can supply original equipment hydraulic accessories and repair parts. Substitute parts may not meet original equipment specifica- tions and may be dangerous.
Never perform service or maintenance with engine running.
Keep all persons away from operator control area while performing adjustments, service, or maintenance.
Tighten all bolts, nuts, and screws to torque chart specifications. Check that all cotter pins are installed securely to ensure equipment is in a safe condition before putting unit into service.
Do not disconnect hydraulic lines until all sys- tem pressure is relieved. Lower unit to ground, stop engine, and operate all hydraulic control levers.
Removal of isolator bolts will let chassis fall. Make sure you support both front and rear ends of chassis securely before you remove the bolts.
When you separate roller drum and chassis, never place fingers or hands between roller drum and chassis.
STORAGE
Follow manual instructions for storage.
Store on level, solid ground.
Block equipment securely for storage.
Keep children and bystanders away from stor- age area.
Alitec Vibratory Roller Safety Rules (Rev. 1/5/2007)
