Model D3274 Gravity Feed Spray Gun w/Regulator
Atomizing Cap and Fan
Adjustments
The atomizing cap needs to be adjusted for horizontal or vertical spraying patterns. Spraying in the wrong direction may lead to material build up on the atomizing cap horn. Many performance problems with properly thinned paint are caused by clogged atomizing holes on the atomizing cap horns (see Cleaning on Page 10).
Pattern |
Stroke |
Pattern |
Control |
Figure 8. Set up for horizontal spray
stroke with vertical fan pattern.
Horns
Figure 7. Atomizing cap horns.
Rotating the pattern adjustment control in Figure 8 and 9 will give you a range between the two patterns in Figure 10.
Stroke
Pattern
Pattern
Control