Woodstock DUST COLLECTORS Casters and Motor, Setup, W1666, W1685 Dust Collectors

W1666, W1685 Dust Collectors

Casters and Motor

For quiet and vibration-free operation, assemble your dust collector as outlined below. DO NOT modify this dust collector for any other purpose than what it is designed for.

To install the casters and motor/impeller assembly, do these steps:

1.MAKE SURE THE DUST COLLECTOR MOTOR IS UNPLUGGED!

2.Install the four swivel casters to the base plate with the sixteen M6-1 X 12 Phillip head screws, washers, and nuts (see Figure 9).

GET assistance when lifting machine parts. The SHOP FOX® Model W1666 and W1685 dust collector motor/impeller assembly is heavy, and ignoring this warning can cause you a severe back injury.

3.Bolt the motor to the motor mount with the four M8-1.25 X 25 hex bolts, washers, and nuts; and with lifting assistance, position the motor/impeller assembly on the base (see Figure 10).

4.Secure the motor/impeller assembly to the base using six M8-1.25 X 16 hex bolts, washers, and nuts (see Figure 11).

Figure 9. Caster installation.

Figure 10. Motor/impeller assembly posi-

tioning.

Motor

Mount

SETUP

Figure 11. Motor/impeller assembly

installation.

-13-