Woodstock DUST COLLECTORS Dust Bags and Inlet Y, Setup, W1666, W1685 Dust Collectors

W1666, W1685 Dust Collectors

Dust Bags and Inlet Y

SETUP

Two dust collection bags are included with your new SHOP FOX® Dust Collector. There is a top and a bot- tom bag. The top is distinguished by a SHOP FOX® logo. Both bags are secured with band clamps. For increased filtration, optional 0.3 micron dust collector bags are available through your dealer.

To install the dust bags and the inlet Y, do these steps:

1.Find the opening in the rim of both bags and insert the band clamps into the rim of the bags until they come out of the other side (see Figure 18).

2.Hang the upper bag as shown in Figure 19.

NOTE: The upper bag has the SHOP FOX® logo on it and the lower bag is plain.

3.Position the rim of the upper bag onto the collector and latch the band clamp closed.

4.Position the rim of the lower bag onto the collector and latch the band clamp closed.

5.Position the inlet Y on the impeller housing inlet, and fasten it in place with the Phillips head screw (see Figure 20).

Figure 18. Latch clamp with toggle.

Figure 19. Fabric loop in upper support

hook.

Figure 20. Securing inlet with screw.

-16-