Woodstock M1107 owner manual Additional Safety Instructions for Grinder

M1107 Bench grinder

Additional Safety Instructions for Grinder

READ and understand this entire instruction manual before using this machine. Serious personal injury may occur if safety and operational information is not understood and fol- lowed. DO NOT risk your safety by not reading!

USE this and other machinery with caution and respect. Always consider safety first, as it applies to your individual working conditions. No list of safety guidelines can be complete—every shop environment is different. Failure to follow guidelines could result in serious personal injury, damage to equipment or poor work results.

SAFETY

1.EYE PROTECTION. Grinding causes small particles to become airborne at a high rate of speed. ALWAYS wear safety glasses when using this machine.

2.MOUNTING TO BENCH/STAND. An unsecured grinder may become dangerously out of control dur- ing operation. Make sure grinder is FIRMLY secured to a bench/stand before use.

3.WHEEL SPEED RATING. Wheels operated at a faster speed than rated for may break or fly apart. Before mounting a new wheel, be sure the wheel RPM rating is equal or higher than the speed of the grinder.

4.WHEEL FLANGES. Only use the flanges included with the grinder when mounting wheels. Other flanges may not properly secure the wheel and cause an accident.

5.RING TEST. Perform a “ring test” on grinding wheels before installation to ensure that they are safe to use. A wheel that does not pass the ring test may break or fly apart during operation.

6.STARTING GRINDER. If a wheel IS damaged, it will usually fly apart shortly after start-up. To protect yourself, always stand to the side of the grinder when turning it ON, allow it to gain full speed and wait for at least 1 minute before standing in front of it.

7.LUNG PROTECTION. Grinding produces hazardous dust, which may cause long-term respiratory problems if breathed. Always wear a NIOSH approved dust mask or respirator when grinding.

8.SIDE GRINDING. Grinding on the side of wheels can cause them to break and fly apart—unless the wheel is rated for side grinding.

9.TOP GRINDING. Grinding on the top of wheels greatly increases the risk of workpiece kickback. Always grind on the downward part of the wheel.

10.HAND/WHEEL CONTACT. Grinding wheels have the capability of removing a lot of skin fast. Keep a firm grip on the workpiece and position your hands a safe distance away when grinding. Avoid wearing gloves as they may get caught in the grinding wheel and cause even more serious entan- glement injuries.

11.TOOL REST POSITION. If the tool rest is too far away from the wheel, the workpiece may be pulled down, causing loss of control and pulling your hand into the grinding wheel. Keep the tool rest within 1⁄8" from the wheel when operating.

-5-