Model W1676
COMBINATION SANDER
MANUAL UPDATE
This update covers changes made to the machine after the owner's manual was printed. All page number references refer to the owner's manual for this machine. Keep this update with your owner's manual for future reference. If you have questions, contact Tech Support at (360)
What Changed?
We added a sleeve guard to the sander to help reduce the risk of entanglement. The sleeve guard MUST be installed on the idler roller guard, using the included lock knobs and flat washers, as shown in Figure 1.
Install the idler roller guard and sleeve guard onto the idler roller after belt tension and track- ing are properly set, as described in the Model W1676 Manual on Pages 18 & 19.
Machine Inventory (See Page 11)
The following items have been added. Refer to the full manual for a description of all other inventory components.
Box Contents: | Qty | |
A. | Sleeve Guard | 1 |
B. | Lock Knobs | 2 |
C. | Flat Washers #10 | 2 |
New Sleeve Guard Parts
Idler Roller
Guard
Sleeve Guard
#10 Flat Washer
Lock Knob
����
������ | ��� | |
��� | ||
|
���
���
Figure 1. Installing sleeve guard.
Figure 2. New sleeve guard parts.
REF | PART�# | DESCRIPTION |
114A | X1676114A | IDLER�ROLLER�GUARD�V2.03.08 |
SLEEVE�GUARD | ||
128 | X1676128 | LOCK�KNOB |
129 | PW03 | FLAT�WASHER�#10 |
COPYRIGHT © MARCH, 2008 BY WOODSTOCK INTERNATIONAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT
#10609BL | THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC. | Printed in Taiwan |
