Figure 4. Mounting the rear rail.
Step 8.
The distance between the front and back rail should be 27'' ± 1⁄4''. Add or remove washers to achieve this measurement. If your measurement does not fall within this range, refer to Section V on page 20 for further instruction.
Step 9.
Measure the distance between both ends of the rails to determine if they are parallel. The differ- ence between the two ends of the rails should be no more than ±1⁄8".
Note: relative parallelism between the ends of the rails is not critical to the accuracy of the fence, but will prevent the unlocked fence from moving by itself in the direction of the taper. Extra washers may be added or removed from between the table and back rail to achieve parallelism.
Step 10.
Mount the cross brace to the end of the rails using the
Shop Fox® Fence |
