Woodstock W1690 instruction manual Beginning, Table-TopMount, Installation

Beginning

You can install the air cleaner unit three ways. See Figures 4 and 5.

•Table-Top Mount, use the rubber feet and/or the flush mount flange brackets for a table-top application. Refer to Page 10.

•Hanging Mount, use the eye bolts for a high ceiling application. Refer to Page 11.

•Flush Mount, use the flange brackets for a wall or low ceiling application. Refer to Page 12.

Hanging Mount

Eye Bolt

Flush Mount

Flange Bracket

Table-Top

Mount

Rubber

Foot

Figure 4. Air cleaner unit mounting options.

INSTALLATION

Keep the air cleaner unit unplugged during all installation procedures. Ignoring this warning may result in serious personal injury to you or others!

Table-Top Mount

You can use the air cleaner unit as a portable air filtration system by installing the rubber feet and placing the unit on a workbench or a table.

Hanging Mount

Eye Bolt

Table-Top

Mount

Rubber

Foot

Flush Mount

Flange Bracket

Get lifting assistance before installation. At 55 pounds, the Model W1690 air cleaner is a heavy load.

To set up the air cleaner for table-top operation, do these steps:

1.With the help of an assistant, carefully invert the air cleaner unit.

2.Expose the sticky backing on the foot, and affix the rubber foot to the bottom of the air cleaner unit. See Figure 6.

3.Repeat Step 2 for remaining feet.

For permanent table-top mounting, refer to the Flush Mount procedure on Page 12, and install the air cleaner unit to the tabletop with the flush mount flange brackets.

Figure 5. Air cleaner unit mounting hardware.

Rubber

Foot

Flush Mount

Flange Bracket

Mounting Holes

Figure 6. Rubber feet correctly installed

(Underside View).

-10-