A.Variable Speed Control Dial—Controls the speed of the lathe spindle. Always turn this dial to the lowest setting before starting the lathe.

B.Headstock—The housing that holds the spin- dle on the lathe.

C.Headstock Spindle—Tapered at the inside end to accept the shank of a Morse Taper #1 (MT#1) spur center and threaded on the outside end to accept the threads of a face plate. The headstock spindle is also hollow for easy removal of the spur center with a knock-out tool.

D.Spur Center—Attaches the workpiece to the spindle for turning operations.

E.Tool Rest—Supports tools used during turn- ing operations.

F.Live Center—Mounts in the tailstock barrel taper and supports the workpiece from the opposite side of the spur center by engaging in the workpiece and spinning freely.

G.Tailstock Barrel Lock—Locks the tailstock barrel in place after being driven into the workpiece and before starting the lathe.

H.Tailstock Adjustment Knob—Moves the tailstock barrel in/out to firmly embed the live center into the workpiece.

I.Tailstock Lock—Locks the tailstock into position along the bed.

J.Tool Rest Holder—Mounts the tool rest to the bed and adjusts perpendicular to the bed to bring the tool rest closer/farther from the workpiece.

K.Tool Rest Lock—Secures the tool rest into position at the proper height needed for the workpiece.

L.Tool Rest Holder Lock—Secures the tool rest holder when the tool rest is the proper distance from the workpiece.

-7-

M.Lathe Bed—Provides a sliding surface for the tool rest holder and tailstock adjust- ments.

N.Lock-Out Paddle Switch—Turns lathe ON/ OFF only when the safety key is installed.

O.Knock-OutTool—Used to remove the spur and live centers from their tapered spin- dles.

P.Face Plate—Threads onto the headstock spindle for non-spindle turning (usually used for making bowls or other items that cannot be supported from the tailstock).

Important Lathe

Terms & Definitions

In order for the safety warnings and operation instructions to be fully understood, please take time to learn these important lathe terms and definitions.

Spindle Turning—When a workpiece is mount- ed between both spur (headstock) and live (tailstock) centers.

Face Plate Turning—When a workpiece is mounted to the face plate, which is mounted to the headstock spindle. The face plate has holes for attaching the workpiece or a backing block with screws.

Backing Block—A waste board that is screwed or bolted to the face plate, then centered and glued to the workpiece, so that the workpiece can be attached to the face plate without drill- ing or screwing marks.

Center Line—The imaginary line running from the center of the headstock spindle to the cen- ter of the tailstock barrel.

Rough Cutting—The initial stage of all turning operations when the workpiece still has corners and has not been rounded. Rough cutting strains the lathe and operator more than regular turn- ing; therefore, special precautions will apply.

SAFETY

Page 8 Page 10
Page 9
Image 9
Woodstock W1704 instruction manual Important Lathe Terms & Definitions
Page 8 Page 10

W1704 specifications

The Woodstock W1704 is a remarkable woodworking machine that has earned a reputation for its versatility and precision in crafting wood projects. Designed with both amateur and professional woodworkers in mind, this machine stands out due to its combination of technology, ease of use, and robust performance.

One of the main features of the W1704 is its powerful motor, which drives a range of cutting tools, including planers, jointers, and table saws. This powerful motor ensures that even the most challenging tasks can be accomplished with ease, cutting through tough woods and complex materials without compromising on performance. The machine is equipped with variable speed settings, allowing users to adjust the speed according to the specific requirements of their project, ensuring optimal results every time.

The W1704 also boasts an impressive precision cutting system. With its finely calibrated guards and guides, users can achieve accurate cuts, whether they are making grooves, bevels, or straight cuts. This level of precision is critical for achieving professional-grade results, making the W1704 a popular choice among serious woodworkers. The machine incorporates modern laser technology to enhance accuracy further, showing exactly where the cut will occur.

Another standout characteristic of the Woodstock W1704 is its ease of operation. The intuitive controls are designed for user-friendly interaction, providing both new and experienced woodworkers with effortless navigation through the machine's various functions. The quick-release fence system ensures that adjustments can be made rapidly and accurately, saving time during project setup.

In terms of safety, the W1704 is equipped with several protective features, including blade guards and emergency shut-off switches. These safety measures make it a reliable choice for workshops, ensuring that users can focus on their craft without unnecessary worry.

Durability is another hallmark of the W1704. Constructed from high-quality materials, this machine is built to withstand the rigors of constant use, making it a prudent investment for any woodworking enthusiast. Its robust design not only extends its lifespan but also enhances its performance under various conditions.

Overall, the Woodstock W1704 embodies a blend of power, precision, and user-friendliness. With its advanced technologies and thoughtful features, it continues to be a favored tool in the woodworking community, helping artisans turn their creative visions into tangible masterpieces. Whether for personal projects or professional-grade tasks, the W1704 delivers reliability and excellence consistently.
Top Page Image Contents