Wow Wee 8000 user manual

Models: 8000

1 24
Download 24 pages 4.91 Kb
Page 19
Image 19

Programming control functions using your robot’s remote controller

Programming control functions using your robot’s remote controller

You can program a control function directly to Roboremote using your WowWee robot’s remote controller instead of using the action selectors in the Roboremote software. For instance, you can use your Roboquad’s remote controller to control a movement and point it directly at your Roboremote’s IR receiver.

To do so:

1.On the Roboremote interface, click on the Receive IR button . Roboremote will confirm that it is in IR Reception Mode when its

LED indicator turns orange.

2.Using your WowWee robot’s remote controller, point to the Roboremote’s IR receiver and enter the movements or BodyCons you want your robot to perform.

For each movement you enter, the action block will appear in the timeline and Roboremote’s LED indicator will blink, just as if you created it using the interface.

TIP: You should refer to your robot’s user manual for reference.

17

Page 19
Image 19
Wow Wee 8000 user manual