USER’S MANUAL OF | Version: 2.6 | |
|
| |
Beacon Interval | Set the Beacon Interval, value can be written between 20 | |
| and 1024 ms. |
|
| Refer to 4.12 What is Beacon Interval? |
|
Data Rate | Select the transmission data rate from | |
| Data rate can be | |
Preamble Type | Click to select the Long Preamble or Short Preamble | |
| support on the wireless data packet transmission. |
|
| Refer to 4.13 What is Preamble Type? |
|
Broadcast SSID | Click to enable or disable the SSID broadcast function. | |
| Refer to 4.14 What is SSID Broadcast? |
|
IAPP | Click to enable or disable the IAPP function. |
|
| Refer to4.19 What is | |
Apply Changes | Click the Apply Changes button to complete the new | |
| configuration setting. |
|
Reset | Click the Reset button to abort change and recover the | |
| previous configuration setting. |
|
3.3.4 Wireless Security Setup
This page allows you setup the wireless security. Turn on WEP or WPA by using encryption keys could prevent any unauthorized access to your wireless network.
Screen snapshot – Wireless Security Setup
12