USER’S MANUAL OF | Version: 2.6 |
|
|
Screen snapshot – LAN Interface Setup
Item | Description |
IP Address | Fill in the IP address of LAN interfaces of this |
| WLAN 11b Broadband Router. |
Subnet Mask | Fill in the subnet mask of LAN interfaces of this |
| |
Default Gateway | Fill in the default gateway for LAN interfaces out going |
| data packets. |
DHCP Server | Select to enable or disable the DHCP server function on |
| LAN interfaces from |
DHCP Client Range | Fill in the start IP address and end IP address to allocate a |
| range of IP addresses; client with DHCP function set will |
| be assigned an IP address from the range. |
Show Client | Click to open the Active DHCP Client Table window that |
| shows the active clients with their assigned IP address, |
| MAC address and time expired information. |
802.1d Spanning Tree | Select to enable or disable the IEEE 802.1d Spanning |
| Tree function from |
Clone MAC Address | Fill in the MAC address that is the MAC address to be |
| cloned. Refer to 4.23 What is Clone MAC Address? |
18