Alarm settings
Suspending the wake up function
If you set channel 1 for an On time of 7:00 AM and number 1 is your bedside lamp, at 7:00 AM every day, your bedside lamp will turn on and the internal buzzer will sound. If you turn the Buzzer switch off on Friday nights the buzzer will not wake you up the next morning but your bedside lamp will still turn on.
To suspend the program for channel 1 turn the Buzzer switch to OFF, AND place the Mode switch in the “Clock Set” position. The On program for BOTH the Alarm buzzer AND the bedside lamp will then be suspended.
You can control Modules instantly with the Mode switch in the “Clock Set” position, just as you can when it's in the RUN position, but remember to place the Mode switch back to RUN and put the Buzzer switch back to the ON position on Sunday night to resume the
Note: Pressing the ON button for Module number 1 with the Mode switch in the RUN position or Clock Set position does not activate the internal buzzer. This buzzer only sounds at the times you set.
Changing the Housecode
When you first plug in the Mini Timer it controls X10 Modules set to Housecode A.. If you want to change the Housecode:
1. Set the Mode switch to “Housecode Set.”
2. Press the up or down "Time" rocker to select the desired Housecode (as shown in the display).
3. Set the Mode switch back to RUN.
13
