Input connections must be made as illustrated. To extend the emitter wires to a more distant location, you may splice in 2-conductor wire, in the wire gauges mentioned before, as needed.

LOCAL SYSTEM APPLICATION

Another application is to locate the IR receiver in a central location, such as the TV, video screen and/or a speaker. The audio/video equipment can then be hidden inside a cabinet or located away from the front of a room. This will give the end-user the ability to direct a remote control to one central location and not have to worry about aiming to the respective device to be controlled.

Since the IR receiver is in close proximity to the audio/video equipment, no wiring extension should be required so long as the connecting block is within reach of the 7-foot cable. The 3.5mm stereo type mini plug is connected to the “IR RCVR” jack on the Xantech Connecting Block.

MOUNTING

The IR receiver can be mounted to any flat surface, using the two-sided adhesive tape supplied. Two screws are included for mounting the 3-terminal block provided with the IR receiver.

An addition feature is a wire channel on the rear of the surface mount IR receiver. This will give the installer the ability to provide clean wire dressing in any direction.

PLACEMENT

The IR receiver should be located so that it is not directly facing a light source such as lamps or displays (standard, LCD, and Plasma). When mounted near a display, it should be flush to the display and away from light reflections that may occur.

Limited Warranty

Xantech® warrants its products to be free of defects in materials or workmanship. This is a Limited Lifetime warranty from the date of purchase by the original consumer. Any products returned to Xantech and found to be defective by Xantech within the warranty period will be repaired or replaced, at Xantech’s option, at no charge. Xantech will not be responsible for the actual cost of installation or removal of the product, nor for any incidental or consequential damages. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you. This warranty gives you specific legal rights. You may have additional legal rights that vary from state to state.

Xantech Corporation

13100 Telfair Ave. 2F, Sylmar CA 91342 Xantech.com

Installation Instructions, 48095D © 2008 Xantech Corporation

Document # 08905176A

This document is copyright protected. No part of this manual may be copied or reproduced in any form without prior written consent from Xantech Corporation. Xantech Corporation shall not be liable for operational, technical, or editorial errors/omissions made in this document.

Page 1 Page 2
Page 2
Image 2
Xantech 48095D installation instructions Local System Application, Mounting, Placement
Page 1 Page 2

48095D specifications

The Xantech 48095D is a versatile and advanced audio/video distribution amplifier designed to meet the needs of both residential and commercial environments. This device is built to support a wide range of applications, providing seamless connection and reliable performance for audio and video signals. With a focus on enhancing system functionality, the 48095D offers features that cater to professional installers and tech-savvy consumers alike.

One of the standout features of the Xantech 48095D is its ability to distribute high-definition video signals to multiple outputs without compromising quality. This unit supports resolutions up to 4K, ensuring that users can enjoy crystal-clear visuals whether for home entertainment, presentations, or live events. With its ability to handle HDMI signals, the device incorporates advanced technologies like HDCP compliance and EDID management, which are crucial for maintaining audio and video fidelity across multiple devices.

The 48095D comprises eight outputs, allowing it to connect multiple displays or projectors, making it ideal for setups in conference rooms, classrooms, or multi-room media systems. The built-in signal amplification technology ensures that users experience optimal performance, tackling issues like signal degradation that can occur over long cable runs.

Furthermore, the Xantech 48095D is equipped with robust cooling mechanisms to ensure reliable operation during extended use. It is designed to withstand the rigors of daily use, making it a dependable component for professional audio-visual systems.

Installation of the 48095D is user-friendly; it comes with clear labeling on the ports and includes multiple control options. Users can integrate the device into existing systems easily, whether they are utilizing remote control options or hardwired installations.

In terms of design, the Xantech 48095D boasts a sleek and compact form factor that enables convenient placement in various settings. Its durable construction is built to last, ensuring that users make a long-term investment in their audio/video distribution needs.

In summary, the Xantech 48095D merges advanced technology with practicality, providing an effective solution for distributing high-quality audio and video signals to multiple destinations. With features like 4K support, signal amplification, and user-friendly operation, it is a top choice for professionals and enthusiasts looking to enhance their multimedia experience.
Top Page Image Contents