Sharp AR-207 operation manual Toner Cartridge Replacement, Genuine Supplies

TONER CARTRIDGE REPLACEMENT

When the toner cartridge replacement required ( ) indicator lights up, replacement of the toner cartridge will be needed soon. Obtain a new cartridge. When the toner cartridge replacement required ( ) indicator blinks, the toner cartridge must be replaced before copying can be resumed. Replace the toner cartridge by following the procedure below.

During a long copy run of a dark original, the indicator may blink and the copier stop, even though toner is left. The copier will feed toner up to 2 minutes and then the START key indicator will light up. Press the START key to restart copying.

For best copying results, be sure to use only SHARP Genuine Supplies which are designed, engineered and tested to maximize the life and performance of SHARP copiers. Look for the Genuine Supplies label on the toner package.

STATUS INDICATORS

GENUINE SUPPLIES

Open the bypass tray. Lift slightly on the side cover

1 and slide the cover out until it stops.

Push gently on both sides of the front cover to open the

2 cover.

Toner cartridge replacement

Toner cartridge lock release lever

4 or 5 times

Push the toner cartridge lock release lever and pull the

3 toner cartridge out. Remove the toner cartridge while supporting it with the left hand at the green label position.

●For disposal of the old toner cartridge, contact your dealer.

Remove the new toner cartridge from the bag. Hold the

4 cartridge on both sides and shake it horizontally four or five times.

42