Manuals / Sharp / Computer Equipment / All in One Printer

Sharp AR-207 Misfeed removal, SHEET PAPER FEED UNIT AR-DE5/2x250-SHEET PAPER FEED UNIT AR-DE6

Models: AR-207

1 84

Download 84 pages 33 Kb

Page 74

Image 74

250-SHEET PAPER FEED UNIT (AR-DE5)/2x250-SHEET PAPER FEED UNIT (AR-DE6)

Misfeed removal

The copier will stop when a misfeed occurs. The misfeed ( ) indicator and the red indicator which indicates the paper feed unit will blink.

2x250-sheet paper feed unit (AR-DE6)	250-sheet paper feed unit (AR-DE5)
EQUIPMENT	OPTIONAL

Open the side cover of the paper feed unit and remove the misfed paper.

●Be sure to perform this step before pulling out the paper trays. If not, the paper may be torn as the trays are opened.

Gently lift and pull out the paper tray which was in use. Remove any misfed paper.

Close the paper tray and the side cover.

●Confirm that the misfeed ( ) indicator has gone out.

Page 74

Image 74

Sharp AR-207 operation manual Misfeed removal, SHEET PAPER FEED UNIT AR-DE5/2x250-SHEET PAPER FEED UNIT AR-DE6

Contents

∙ SPECIAL FEATURES MODELPage ∙ STATUS INDICATORSFOR YOUR RECORDS SAFETY PRECAUTIONSCAUTIONS STATUS INDICATORS CONTENTS PageSPECIAL FEATURES GETTING STARTEDINTRODUCTION Conventions used in this manualOptional features MAIN FEATURESSubstantial copying features such as High-speed laser copyingPower switch PART NAMES AND FUNCTIONSOverall layout Charger cleanerAccessories PART NAMES AND FUNCTIONSFusing unit release levers Reversing single pass feeder RSPF Feeding roller coverZOOM indicator p.24 Operation panelINTERRUPT key and indicator p PAPER SIZE indicatorsORIGINAL SIZE ENTER key and indicators START key and indicatorPRESET RATIO selector keys and indicators AUTO PAPER SELECT indicatorAlso make certain the outlet is properly grounded COPIER INSTALLATIONDo not install your copier in areas that are Be sure to allow the required space around the machine forCAUTIONS ON HANDLING Do not touch the photoconductive drum green portionPush the pressure plate down until it locks in place LOADING COPY PAPER1 Gently lift and pull out the paper tray until it stops 4 Push the paper tray firmly back into the copier3 front guide to match the width of the paper LOADING COPY PAPERSqueeze the lock lever of the front guide and slide the When using 5-1/2 x 8-1/2 copy paper, load it into the uppermost9 which the paper size has been changed To set the selected paper size, press the PAPER SIZE ENTER keyUse the TRAY SELECT key to select the paper tray of Use the ORIGINAL SIZE ENTER key to select the paper size which is setEnter your account number using the numeric keys When copying is completed, press the AUDIT CLEAR 2 keyAUDITING ACCOUNTS 2 Adjust the original guides to the size of the originals Power onTurn the power switch on NORMAL COPYING4 selected in the ORIGINAL TO COPY section of the operation panel Adjust the copy densityNORMAL COPYING Ensure that the one-sided to one-sided copying mode isPress the START key Set the number of copies using the numeric keysTwo-sided copies from one-sided originals Ensure that no original is left on the original tableUse the ORIGINAL TO COPY key to select Ensure that no original is left on the original table. AdjustTwo-sided copies from two-sided originals Set the number of copies and press the START keythe image rotation feature. This feature is useful when One-sided copies from two-sided originalsThe image of every front side can be rotated 180 using To set this feature, see page 22. This feature can also4 Ensure that the desired paper tray is selected COPYING FROM THE ORIGINAL TABLEClose the document feeder cover Turn the power switch onSet the number of copies using the numeric keys COPYING FROM THE ORIGINAL TABLEAdjust the copy density Press the START keyEnsure that the desired paper tray is selected Place the first original face down on the original table1 and close the document feeder cover COPYING FROM THE ORIGINAL TABLE5 and press the START key again to copy onto the other side Setting image rotation in duplex copyingPlace the second original face down on the original table Press and hold down the ORIGINAL TO COPY key for1 original table REDUCTION/ENLARGEMENT/ZOOMAutomatic 2 the desired paper sizeManual 1 original table Use the PRESET RATIO selector , keys and theREDUCTION/ENLARGEMENT/ZOOM Place the original in the document feeder tray or on theSet the paper guides to the copy paper width BYPASS FEED special paper1 Unfold the bypass tray BYPASS FEED special paper Leave the copy quantity at 0 if using special papers. Set5 the number of copies if using standard copy paper or envelopes 4 Press the TRAY SELECT key to select the bypass trayIf the offset stack mode is disabled, copies will not be offset Sort modeGroup mode The offset stack mode is enabled in the factory default settingSORT/GROUP Copying in the sort mode2 Press the SORT/GROUP key to select the SORT mode 3 Ensure that the desired copy paper size is selectedPress the INTERRUPT key When all INTERRUPT copies are finished, press theINTERRUPTING A COPY RUN 2 the originals for interrupt copyingPress the AUTO/MANUAL/PHOTO key AUTOMATIC EXPOSURE ADJUSTMENTPress the AUTO/MANUAL/PHOTO key to select the PHOTO mode To enter the toner save mode, press the light key TONER SAVE MODEPress the AUTO/MANUAL/PHOTO key to select the MANUAL mode MAKING COPIES Toner save modePress the XY-ZOOM key Use the PRESET RATIO selector , keys and zoomXY ZOOM 3 , keys to change the copy ratio in the vertical directionUse the PRESET RATIO selector , keys and zoom XY ZOOMSet the number of copies Press the START key SPECIAL FEATURES XY zoomMake all other desired copier selections and press the START key B/W REVERSEPress the B/W REVERSE key The B/W REVERSE feature is used to reverse black and white areasSet the number of copies Press the START key DUAL PAGE COPYPress the DUAL PAGE COPY key Place the originals on the original table with the centerthe flashing indicator to prevent image loss on the copies ROTATION COPYINGIMAGE mode has been selected. Even if user program No. 7 is not set 8-1/2 x 11 is performed, the image cannot be rotatedTo confirm or set the layout pattern for 2 in 1 copying 2 IN 1 OR 4 INUse the TRAY SELECT key to select the paper tray with 2 the desired paper sizePress the 2 IN 1 / 4 IN 1 key to complete the selection Enter the desired pattern number using a numeric key2 IN 1 OR 4 IN Press the START keyAB A B Press the ERASE key to select the desired erase modeERASE A BSet the number of copies Press the START key ERASESPECIAL FEATURES Erase To confirm or set the location of the margin, press and until the MARGIN SHIFT indicator will blinkMARGIN SHIFT Press the MARGIN SHIFT keyOpen the bypass tray. Lift slightly on the side cover TONER CARTRIDGE REPLACEMENTGENUINE SUPPLIES 1 and slide the cover out until it stops1 seconds until all the alarm indicators TONER CARTRIDGE REPLACEMENThandle on the cover. The indicator will go out Toner cartridge lifeFirst confirm the misfeed location i MISFEED REMOVALMisfeed in the RSPF Open the feeding roller cover and pull the original gentlyMISFEED REMOVAL Open and close the document feeder cover to cancel the4 misfeed location indicator Misfeed in the bypass trayCheck the misfeed location. Remove the misfed paper B. Misfeed in the fusing areaA. Misfeed in the paper feed area Push gently on both sides of the front cover to open the 1 coverTurn the roller rotating knob in the direction of the Carefully remove the misfed paper. Lower the fusingC. Misfeed in the transport area MISFEED REMOVALGently lift and pull out the upper paper tray and remove Misfeed in the upper paper trayClose the side cover by pressing the handle on the 3 cover 1 the misfed paper 2 Close the paper trayRemove the misfed paper Misfeed in the lower paper trayGrasp the handle of the lower side cover and gently 1 open the cover 3 pull out the lower paper tray and remove the misfed paperINDICATORS MAINTENANCE REQUIREDDEVELOPER REQUIRED Maintenance requiredProgram USER PROGRAMSList of user programs Program nameUSER PROGRAMS Setting the user programsEnter a program number using the numeric keys and blink and “- -” appears in the copy quantity displayUSER PROGRAMS Select the desired parameter using the numeric keysfunction will be disabled Press the START key1. Select the desired setting using the numeric keys Settings for auditing accountsProgram No. 10 Auditing mode 1. Enter a 3-digit account number using the numeric keysProgram No. 13 Account number deletion 3. Enter a new account number using the numeric keysUSER PROGRAMS Program No. 12 Account number change number to be changed2. Press and hold down the 0 key USER PROGRAMS Program No. 14 Number of copies per account1. Use the copy ratio display key to select the account number Example 1,234 copiesTo reset all accounts, press key 2. Press the START key USER PROGRAMS Program No. 15 Resetting account1. To reset an individual account, press the 0 key number to be resetAuto power shut-off mode POWER SAVE MODESPreheat mode Copying from the preheat mode POWER SAVE MODESSetting the power save modes Copying from the auto power shut-off modeOriginal table and document feeder cover USER MAINTENANCEbypass tray with a soft, clean cloth dampened with Bypass tray paper feed rollerTurn the power switch off USER MAINTENANCETransfer charger cleaning 3 charger cleaner out by holding the tabCOPIER TROUBLE? ProblemSolution Problem COPIER TROUBLE?COPY/FAX key SolutionSolution Self-diagnostic functionProblem COPIER TROUBLE?SUPPLIES Types and sizes of copy paperProper storage SUPPLIESGenuine supplies statement 1. Store the supplies in a location that isSPECIFICATIONS GENERALGENERAL INFORMATION Specifications SPECIFICATIONSREVERSING SINGLE PASS FEEDER 250-SHEET PAPER FEED UNIT AR-DE5 2x250-SHEET PAPER FEED UNIT AR-DE6 CONTENTSOPTIONAL EQUIPMENT EQUIPMENT2x250-sheet paper feed unit SYSTEM CONFIGURATIONSystem configuration OPTIONAL These options are not used for the copier operationLoading copy paper 250-SHEET PAPER FEED UNIT AR-DE5PART NAMES 250-sheet paper feed unitClose the paper tray and the side cover Misfeed removal250-SHEET PAPER FEED UNIT AR-DE5/2x250-SHEET PAPER FEED UNIT AR-DE6 AR-DE6 SpecificationsAR-DE5 250-SHEET PAPER FEED UNIT AR-DE5/2x250-SHEET PAPER FEED UNIT AR-DE6INDEX INDEX Section 2. Supplier’s Name and Address MATERIAL SAFETY DATA SHEETSection 1. Product Identification Section 3. IngredientsSection 7. Fire and Explosion Data Section 6. Physical Chemical CharacteristicsSection 9. Precautions for Safe Handling and Use Section 8. Reactivity DataSupplier’s Name and Address SectionProduct Identification IngredientsIgnition Temperature Section 6. Physical Chemical CharacteristicsSection 9. Precautions for Safe Handling and Use Special Fire Fighting ProcedureMEMO For users in the USA NOTICE for users in the USASHARP CORPORATION PRINTED IN CHINAAR-207 SHARP ELECTRONICS CORPORATION