Sharp AR-207 Reduction/Enlargement/Zoom, Automatic, original table, the desired paper size

REDUCTION/ENLARGEMENT/ZOOM

Reduction and enlargement ratios can be selected either automatically with the AUTO IMAGE key or manually with the PRESET RATIO selector ( , ) keys and/or the zoom (, ) keys. The zoom function enables precise copy ratio selection from 50% to 200% in 1% increments.

Automatic

Place the original in the document feeder tray or on the

1 original table.

●The ORIGINAL SIZE indicator for the detected size will light up.

Use the TRAY SELECT key to select the paper tray with

2 the desired paper size.

●This feature will not work when copy paper of non-standard size is used or the bypass tray is used.

3	Press the AUTO IMAGE key.
	●	The copy ratio will be automatically set.
	●	If a PRESET RATIO indicator is blinking, part of the original image
		may not be copied.

●If user program No.7 is not set and the orientation of

the original does not correspond to standard reduction/enlargement ratios for the selected paper tray, the ORIGINAL SIZE indicator will blink. Change the orientation of the original.

4 Set the number of copies.

5 Press the START key.

● To cancel the automatic reduction/enlargement mode, press the AUTO IMAGE key again.

● When copying from the RSPF with this feature, the automatic reduction/enlargement mode will be automatically canceled after copying is complete.

MAKING COPIES Reduction/enlargement/zoom

23