Sharp AR-207 Auditing Accounts, When copying is completed, press the Audit Clear Key

AUDITING ACCOUNTS

If this copier has been programmed in the auditing mode, it will not function until an assigned 3-digit account number has been entered. See page 54 for setting the auditing mode.

If the copier has been programmed in the auditing mode, “ –––” will appear in the copy quantity display in the initial conditions.

1	Enter your account number using the numeric keys.
	● As each digit is entered, the dashes in the copy quantity display will

disappear.

● After the number is entered, the copy quantity display will change to 0.

● If an unassigned number is entered, “ –––” will appear again in the copy quantity display, indicating that the number was not accepted.

MAKING COPIES Auditing accounts

When copying is completed, press the AUDIT CLEAR

2 key.

●“ –––” will appear again in the copy quantity display, indicating the auditing mode.

●In the interrupt copy mode (see page 29), press the INTERRUPT key after an interrupt copy run is completed. All previous copier settings will be restored and the previous account number will be active.

13