Sharp AR-207 operation manual Select the desired parameter using the numeric keys

USER PROGRAMS

4	Select the desired parameter using the numeric keys.
	● The entered parameter number will blink on the right side of the copy

quantity display.

● The parameters are shown in the table below.

For example, to change the setting of the auto power shut-off timer to 60 min., press key 2.

Program name	Parameters
Auto clear time	0	OFF	1	30 sec.	* 2	60 sec.	3	90 sec.	4	120 sec.
	5	10 sec.
Preheat mode	0	OFF	1	30 sec.	2	60 sec.	* 3	90 sec.	4	120 sec.
Auto power shut-off timer	* 1	30 min.	2	60 min.	3	90 min.	4	120 min.	5	240 min.
Stream feeding mode	* 0	OFF	1	ON
Auto power shut-off setting	0	OFF	* 1	ON
Border line for 2 in 1 or 4 in 1	* 0	OFF	1	ON
Rotation copy	0	OFF	* 1	ON
Auto paper select mode	0	OFF	* 1	ON
Auto tray switching	0	OFF	* 1	ON
Erase width adjustment	0	0"	1	1/4"	* 2	1/2"	3	3/4"	4	1"
Layout in 2 in 1 copy	* 1	Pattern 1	2	Pattern 2
Layout in 4 in 1 copy	* 1	Pattern 1	2	Pattern 2	3	Pattern 3	4	Pattern 4
Offset of paper output tray	0	Upper OFF, lower OFF			* 1	Upper ON, lower ON
	2	Upper ON, lower OFF			3	Upper OFF, lower ON
Image rotation in duplex	* 0	OFF	1	ON
copying
Location of the margin	* 1	Left	2	Top
Factory default settings are indicated with an asterisk (*). For layout in 2 in 1 copy and 4 in 1 copy, see page 37.
				If you select “0” (OFF) in a program, the corresponding
				function will be disabled.

5	Press the START key.
	● The right-hand number in the copy quantity display will be steadily lit

and the entered value will be stored.

GENERAL INFORMATION

To continue with other user programs, press the key

6 and then repeat steps 2 to 5. To exit the user program mode, press the light () key.

●All the alarm indicators will go out.

User programs

53