Sharp AR-207 Two-sided copies from two-sided originals, Use the ORIGINAL TO COPY key to select

NORMAL COPYING

3	Set the number of copies and press the START key.
	●	To stop a copy run during duplex copying, press the CLEAR (	)
		key.
		To cancel the duplex mode, press the ORIGINAL TO
		COPY key repeatedly until the indicators in the		MAKINGCOPIES
		ORIGINAL TO COPY section all go out.

Two-sided copies from two-sided originals

Normal copying

Ensure that no original is left on the original table. Adjust

1 the original guides to the size of the originals and set the originals face up in the document feeder tray.

●5-1/2" x 8-1/2" size original or copy paper cannot be used.

2

3

Use the ORIGINAL TO COPY key to select .

●When this mode is selected, the RSPF indicator will light up even if no original has been set in the document feeder tray.

Set the number of copies and press the START key.

●Be sure not to touch the originals as they move on the reversing tray. This may cause misfeeds.

17