NORMAL COPYING
●The ORIGINAL SIZE indicator for the detected original size will light up, and the paper tray with the corresponding paper size will be automatically selected.
●The auto paper select function can be disabled using user program No. 8. If this function has been disabled, use the TRAY SELECT key to select the desired paper tray. See page 51, USER PROGRAMS.
●To copy onto a different size paper, use the TRAY SELECT key to make the selection.
●The bypass tray cannot be automatically selected.
Ensure that the one-sided to one-sided copying mode is
4 selected in the ORIGINAL TO COPY section of the operation panel.
●When no indicator in the ORIGINAL TO COPY section is lit, the
Adjust the copy density.
5 ● This copier has three exposure modes to choose from — AUTOMATIC, MANUAL, and PHOTO.
●Automatic exposure is the standard initial setting for this copier. In this mode, the characteristics of the original are “read” by the exposure system and adjustments are automatically made. This optimizes the contrast of the copied images by reducing the effect of colored or shaded background areas. See page 30 to adjust the automatic exposure level.
●For manual density adjustment, press the AUTO/MANUAL/PHOTO
key to select MANUAL and adjust with the light (
) and dark (
) keys as desired.
●For photographs, select PHOTO and then adjust with the light (
)
and dark (
) keys as desired.
●There are 5 exposure steps indicated by 3 indicator lights. (The indicators light up one or two at a time.)
If exposure level 2 is selected, the two
MAKING COPIES Normal copying
15
