Toner Save Mode | Sharp AR-207 specs

TONER SAVE MODE

This mode reduces toner consumption by approximately 10% in the automatic and manual exposure modes. Copies will be lighter but still adequate for general use. Selection of this mode does not affect the PHOTO mode. Follow the procedure below for setting the toning level.

1

2

Press the AUTO/MANUAL/PHOTO key to select the MANUAL mode.

Press and hold down the AUTO/MANUAL/PHOTO key for approximately 5 seconds.

●The MANUAL indicator will go out and the PHOTO indicator will begin to blink.

●The exposure indicator marked “5” will light up, indicating that the standard toner mode is active.

MAKING COPIES Toner save mode

3

4

To enter the toner save mode, press the light () key.

●The exposure indicator marked “1” will light up, indicating that the toner save mode is selected.

Press the AUTO/MANUAL/PHOTO key.

●The PHOTO indicator will stop blinking and will light up steadily. The toner save mode is now active.

●To return to the standard mode, repeat the procedure but use the dark () key to select exposure level “5” in step 3.

31

Image 33

Sharp AR-207 operation manual Toner Save Mode, To enter the toner save mode, press the light key

Contents

AR-207 Safety Precautions Contents Conventions used in this manual Introduction Main Features Part Names and Functions Part Names and Functions Zoom indicator p.24 Interrupt key and indicator pPaper Size indicators Alarm indicators Preset Ratio selector keys and indicators Start key and indicatorOriginal Size Enter key and indicators Auto Paper Select indicator Copier Installation Do not install your copier in areas that areAlso make certain the outlet is properly grounded Do not touch the photoconductive drum green portion Loading Copy Paper Gently lift and pull out the paper tray until it stopsPush the paper tray firmly back into the copier Loading Copy Paper Press the Start key and then the Paper Size Enter 11 key When copying is completed, press the Audit Clear Key Enter your account number using the numeric keysAuditing Accounts Turn the power switch on Power onStream feeding mode Normal Copying Adjust the copy density Ensure that the one-sided to one-sided copying mode isNormal Copying Two-sided copies from one-sided originals Set the number of copies using the numeric keysPress the Start key Ensure that no original is left on the original table Two-sided copies from two-sided originals Set the number of copies and press the Start keySet the number of copies and press the Start key Original has been set in the document feeder tray One-sided copies from two-sided originals Ensure that the desired paper tray is selected Close the document feeder cover Copying from the Original Table Copying from the original table Setting image rotation in duplex copying Select the desired parameter using the numeric keysPress the Original to Copy key Automatic REDUCTION/ENLARGEMENT/ZOOM Manual REDUCTION/ENLARGEMENT/ZOOMRatio, then press To increase the ratio Unfold the bypass tray Bypass Feed special paper Bypass Feed special paper Group mode Sort modeSORT/GROUP Offset stack Copying in the sort mode SORT/GROUPSet the originals face up in the document feeder tray Interrupting a Copy RUN Automatic Exposure Adjustment To enter the toner save mode, press the light key Toner Save Mode Press the copy ratio display key XY Zoom XY Zoom Use the Preset Ratio selector , keys and zoom Reverse Dual page Copy Press the Dual page Copy keyPlace the originals on the original table with the center 2 x 11 is performed, the image cannot be rotated Rotation Copying 1 or 4 Press the 2 in 1 / 4 in 1 key to complete the selection Enter the desired pattern number using a numeric key Press the Erase key to select the desired erase mode EraseEnsure that the desired copy paper size is selected Erase Margin Shift Until the Margin Shift indicator will blinkPlace the original in the document feeder tray or on To confirm or set the location of the margin, press Push the toner cartridge lock release lever and pull Toner Cartridge Replacement Toner cartridge life Toner Cartridge ReplacementThan 5 seconds Press the light key First confirm the misfeed location Misfeed in the Rspf Misfeed in the bypass tray Misfeed RemovalMisfeed in the copier If the misfed original cannot be removed in steps 1 Push gently on both sides of the front cover to open Cover Removing it Arrow Turn the roller rotating knob in the direction Close the side cover by pressing the handle on Cover Misfeed in the upper paper tray Pull out the lower paper tray and remove the misfed paper Misfeed in the lower paper trayClose the paper tray Close the lower side cover If the misfed paper is not seen in , gently lift Developer Required Maintenance Required User Programs List of user programsProgram Program name Description Enter a program number using the numeric keys Setting the user programsUser Programs Program name Program No To continue with other user programs, press the key Settings for auditing accounts Select the desired setting using the numeric keysEnter a 3-digit account number using the numeric keys Use the copy ratio display key to select the account Number to be changed Press and hold down the 0 key Use the copy ratio display key to select the account Number Program No Resetting account Power Save Modes Preheat modeAuto power shut-off mode Setting the power save modes Power Save ModesCopying from the preheat mode Copying from the auto power shut-off mode Bypass tray with a soft, clean cloth dampened with User MaintenanceOriginal table and document feeder cover Bypass tray paper feed roller Transfer charger cleaning User MaintenanceCharger cleaner out by holding the tab Gently lift and pull out the upper paper tray and take Copier TROUBLE? Problem Solution Problem Copier TROUBLE?COPY/FAX key Example Self-diagnostic function Types and sizes of copy paper Supplies Genuine supplies statement SuppliesProper storage Store the supplies in a location that is Rspf Specifications Reversing Single Pass Feeder Specifications Optional Equipment System Configuration Loading copy paper Part Names Misfeed removal AR-DE5 Specifications Index Index Emergency and First Aid Procedures Material Safety Data SheetProduct Routes of Entry Special Fire Fighting Procedure Ignition TemperatureSpecific Gravity Vapor Pressure Vapor Density Proportion IngredientsHealth Hazards Medical Conditions Generally Aggravated by Exposure Appearance Fine powder Color Black Odor Odorless Evaporation Rate Not applicable Viscosity Memo For users in the USA Sharp Corporation