Sharp AR-207 operation manual Interrupting a Copy RUN

INTERRUPTING A COPY RUN

INTERRUPT is used to interrupt a long copy run so that another job can be done.

●SORT or GROUP cannot be selected during interrupt copying.

●INTERRUPT will not function during two-sided copying.

●Two-sided copying cannot be performed during INTERRUPT copying.

1	Press the INTERRUPT key.
	● The copier will return to the initial settings.
	● If this copier has been programmed in the auditing mode using user
	program No. 10, “ ￿￿￿” will appear in the copy quantity display. Enter
	your account number using the numeric keys. The number of copies
	of the interrupt copying will be accumulated against this account
	number. See page 13.
	● When the RSPF is being used, the copier will stop after completing the
	copying of the original which has been fed into the RSPF.
	When the copier stops, remove the original(s) and set
2 the original(s) for interrupt copying.
3	Select the desired available copier functions.
4	Set the number of copies.
5	Press the START key.
	● The interrupt copies will be offset from the previous copies when user

program No. 19 is enabled. See page 51.

MAKING COPIES Interrupting a copy run

When all INTERRUPT copies are finished, press the

6 INTERRUPT key again to cancel the INTERRUPT mode, and remove the original used for interrupt copying.

●The previous copy quantity, copy ratio, copy density, and paper size will be automatically restored.

Replace the original for the interrupted job and press the

7 START key to resume copying.

29