Removing it | Sharp AR-207 specs

MISFEED REMOVAL

STATUSINDICATORS Misfeed removal

Check the misfeed location. Remove the misfed paper

2 following the instructions for each location in the illustration below.

If paper is misfed here, proceed to “B. Misfeed in the fusing area”.

If the misfed paper is seen from this side, proceed to “C. Misfeed in the transport area”.

If paper is misfed here, proceed to “A. Misfeed in the paper feed area”.

A. Misfeed in the paper feed area

Push gently on both sides of the front cover to open the

1 cover.

Carefully remove the misfed paper. Turn the roller

2 rotating knob in the direction of the arrow to assist in

Roller rotating knob	removing it.
Roller rotating knob
	The fusing unit is hot. Take care in removing paper.
	Do not touch the photoconductive drum (green portion)
	when removing the misfed paper. Doing so may damage
	the drum and cause smudges on copies.

Close the front cover by pushing both sides with your

3 hands and then close the side cover by pressing the handle on the cover.

● The misfeed ( ) indicator will go out.

When closing the covers, be sure to close the front cover securely and then close the side cover. If the covers are closed in the wrong order, the covers may be damaged.

B. Misfeed in the fusing area

Push gently on both sides of the front cover to open the

1 cover.

46

Image 48

Sharp AR-207 operation manual Removing it, Push gently on both sides of the front cover to open Cover

Contents

AR-207 Safety Precautions Contents Introduction Conventions used in this manual Main Features Part Names and Functions Part Names and Functions Interrupt key and indicator p Zoom indicator p.24Paper Size indicators Alarm indicators Start key and indicator Preset Ratio selector keys and indicatorsOriginal Size Enter key and indicators Auto Paper Select indicator Copier Installation Do not install your copier in areas that areAlso make certain the outlet is properly grounded Do not touch the photoconductive drum green portion Loading Copy Paper Gently lift and pull out the paper tray until it stopsPush the paper tray firmly back into the copier Loading Copy Paper Press the Start key and then the Paper Size Enter 11 key When copying is completed, press the Audit Clear Key Enter your account number using the numeric keysAuditing Accounts Power on Turn the power switch onStream feeding mode Normal Copying Adjust the copy density Ensure that the one-sided to one-sided copying mode isNormal Copying Set the number of copies using the numeric keys Two-sided copies from one-sided originalsPress the Start key Ensure that no original is left on the original table Two-sided copies from two-sided originals Set the number of copies and press the Start keySet the number of copies and press the Start key One-sided copies from two-sided originals Original has been set in the document feeder tray Close the document feeder cover Ensure that the desired paper tray is selected Copying from the Original Table Copying from the original table Setting image rotation in duplex copying Select the desired parameter using the numeric keysPress the Original to Copy key REDUCTION/ENLARGEMENT/ZOOM Automatic REDUCTION/ENLARGEMENT/ZOOM ManualRatio, then press To increase the ratio Bypass Feed special paper Unfold the bypass tray Bypass Feed special paper Sort mode Group modeSORT/GROUP Offset stack Copying in the sort mode SORT/GROUPSet the originals face up in the document feeder tray Interrupting a Copy RUN Automatic Exposure Adjustment Toner Save Mode To enter the toner save mode, press the light key XY Zoom Press the copy ratio display key Use the Preset Ratio selector , keys and zoom XY Zoom Reverse Dual page Copy Press the Dual page Copy keyPlace the originals on the original table with the center Rotation Copying 2 x 11 is performed, the image cannot be rotated 1 or 4 Enter the desired pattern number using a numeric key Press the 2 in 1 / 4 in 1 key to complete the selection Press the Erase key to select the desired erase mode EraseEnsure that the desired copy paper size is selected Erase Until the Margin Shift indicator will blink Margin ShiftPlace the original in the document feeder tray or on To confirm or set the location of the margin, press Toner Cartridge Replacement Push the toner cartridge lock release lever and pull Toner Cartridge Replacement Toner cartridge lifeThan 5 seconds Press the light key Misfeed in the Rspf First confirm the misfeed location Misfeed Removal Misfeed in the bypass trayMisfeed in the copier If the misfed original cannot be removed in steps 1 Removing it Push gently on both sides of the front cover to open Cover Turn the roller rotating knob in the direction Arrow Misfeed in the upper paper tray Close the side cover by pressing the handle on Cover Misfeed in the lower paper tray Pull out the lower paper tray and remove the misfed paperClose the paper tray Close the lower side cover If the misfed paper is not seen in , gently lift Maintenance Required Developer Required User Programs List of user programsProgram Program name Description Setting the user programs Enter a program number using the numeric keysUser Programs Program name Program No To continue with other user programs, press the key Settings for auditing accounts Select the desired setting using the numeric keysEnter a 3-digit account number using the numeric keys Number to be changed Use the copy ratio display key to select the account Use the copy ratio display key to select the account Number Press and hold down the 0 key Program No Resetting account Power Save Modes Preheat modeAuto power shut-off mode Power Save Modes Setting the power save modesCopying from the preheat mode Copying from the auto power shut-off mode User Maintenance Bypass tray with a soft, clean cloth dampened withOriginal table and document feeder cover Bypass tray paper feed roller User Maintenance Transfer charger cleaningCharger cleaner out by holding the tab Gently lift and pull out the upper paper tray and take Problem Solution Copier TROUBLE? Problem Copier TROUBLE?COPY/FAX key Self-diagnostic function Example Supplies Types and sizes of copy paper Supplies Genuine supplies statementProper storage Store the supplies in a location that is Specifications Rspf Specifications Reversing Single Pass Feeder Optional Equipment System Configuration Part Names Loading copy paper Misfeed removal Specifications AR-DE5 Index Index Material Safety Data Sheet Emergency and First Aid ProceduresProduct Routes of Entry Ignition Temperature Special Fire Fighting ProcedureSpecific Gravity Vapor Pressure Vapor Density Ingredients ProportionHealth Hazards Medical Conditions Generally Aggravated by Exposure Evaporation Rate Not applicable Viscosity Appearance Fine powder Color Black Odor Odorless Memo For users in the USA Sharp Corporation