Sharp AR-207 Copier Trouble?, COPY/FAX key, Problem, Solution, GENERAL INFORMATION Copier

COPIER TROUBLE?

Problem

Copies are smudged or dirty.

		Solution
● Original table or document		Clean regularly. See page 60.
feeder cover dirty?
● Original smudged or blotchy?		Use a clean original.
● Is the	indicator on?	Developer is reguired. Contact your SHARP
		service center as soon as possible. See page
		50.
● Is the	indicator on?	Maintenance is required. Contact your SHARP
		service center as soon as possible. See page
		50.

Paper size for a paper tray cannot be set.

Power is on but copying is not possible.

●Is the COPY indicator off?

●Is copying, printing or facsimile printing being performed?

●Is the POWER SAVE indicator blinking?

●Is only the POWER SAVE indicator on? (when an optional printer or facsimile expansion kit is installed)

●Is the COPY indicator off?

●Is steadily lit in the copy quantity display?

●Is the indicator on?

Use the COPY/FAX key to select the COPY mode. See Note below.

Set the paper size after copying, printing or facsimile printing is complete.

Wait until warm-up is complete.

Warm-up time is approximately 35 seconds.

The copier is in the auto power shut-off mode. Press the START key. See page 58, POWER SAVE MODES.

Use the COPY/FAX key to select the COPY mode. See Note below.

The copier is in the auditing mode.

Enter your account number using the numeric keys. See page 13.

Paper is needed. See page 10, LOADING COPY PAPER.

GENERAL INFORMATION Copier

COPY/FAX key

The COPY/FAX key is used to switch between the FAX and COPY modes. For details, see the MULTI ACCESS manual.

trouble?

63