MAKING COPIES Reduction/enlargement/zoom
REDUCTION/ENLARGEMENT/ZOOM
Manual
Place the original in the document feeder tray or on the
1 original table.
Use the PRESET RATIO selector (
, 
) keys and the
2 zoom (
, 
) keys to select the desired copy ratio.
●To select a preset reduction or enlargement copy ratio, press the 
or 
key repeatedly until the indicator for the desired copy ratio is lit.
A. Preset reduction ratios are: 95%, 77%, 64%, and 50% .
B. Preset enlargement ratios are: 121%, 129%, 141%, and 200%.
C. Zoom ratios: Any ratio from 50% to 200% can be set, in 1%
increments. Press the | or | key to set the approximate |
ratio, then press the | key to decrease the ratio or the key | |
to increase the ratio. |
|
|
● When a zoom (
, 
) key is pressed, the ZOOM indicator will light up and the zoom ratio will be displayed in the copy quantity display for at least two seconds.
●To verify a zoom setting without changing the zoom ratio, press and
hold down the copy ratio display (
) key. When the key is released, the display will return to the copy quantity display.
● To decrease or increase the zoom ratio rapidly, press and hold down
the 
or 
key. However the value will stop at the preset reduction or enlargement ratios. To move beyond these ratios, release the key and then press and hold it down again.
D. 
or 
key repeatedly until the copy ratio returns to 100%.
Ensure that the desired paper tray is selected.
3 ● If the auto paper select function has been enabled, the appropriate copy paper size will have been automatically selected based on the original size and the selected copy ratio. If the selected PRESET RATIO indicator or the ZOOM indicator blinks, the selected copy image is too large for the copy paper size.
● If the auto paper select function has been disabled or if copying onto a different size paper, use the TRAY SELECT key to select the paper feed station with the desired paper size.
4 Set the number of copies and press the START key.
24
