Xantech DCH4 Line OUT to Phones, Accessing the Programming Mode Remotely Step

PROGRAMMING

A. Accessing Programming

1. Accessing the Programming Mode with a Security Code

Step 1.

Step 2.

Step 3.

Step 4.

Step 5.

Come off-hook with any house phone (device) connected to terminals 4 & 5,

LINE OUT TO PHONES.

Enter *# followed by the 6-digit security code (factory set to 845464).

A double beep will indicate that you have accessed the programming mode. You can now Touch Tone program the features listed in section B below. When finished programming, hang up.

2. Accessing the Programming Mode Locally (Security Code Bypass Mode)

Note: This mode is useful for programming the DCH4 without a telephone line connected.

Step 1.

Step 2.

Step 3.

Step 4.

Step 5.

Move DIP switch 2 from OFF to ON (Security Code Bypass Mode, see DIP Switch Programming section D).

Come off-hook with any house phone connected to terminals 4 & 5, LINE

OUT TO PHONES

A double beep will indicate that you have accessed the programming mode. You can now Touch Tone program the features listed in section B below. When finished programming, hang up and move DIP switch 2 to the OFF position.

3. Accessing the Programming Mode Remotely

Step 1.

Step 2.

Step 3.

Step 4.

Step 5.

Call into the DCH4 from a Touch Tone phone. Note: Call in from another line to avoid C.O. busy signals, etc.

Answer the call from any house phone (device) connected to terminals 4 & 5,

LINE OUT TO PHONES.

From either phone enter *# followed by the six digit security code (factory set to 845464, see Programming section C).

A double beep will indicate that you have accessed the programming mode. You can now Touch Tone program the features listed in section B below.

Note: Programming from a cell-phone may not be suitable in areas with weak coverage.

08905107C - 3 -