Xantech DCH4 installation instructions Quick Programming Features

B. Quick Programming Features

	Enter Digits	- then -	Memory
			Location
Privacy Number (factory disabled)	0-6 digits (0-9)	+	#00
Entry phone 1 keyless entry codes (factory disabled)	4-6 digits (0-9)	+	#11 - #16
* Entry phone 1 one time use keyless entry codes (factory disabled)	4-6 digits (0-9)	+	*#11 - *#16
Entry phone 2 keyless entry codes (factory disabled)	4-6 digits (0-9)	+	#21 - #26
* Entry phone 2 one time use keyless entry codes (factory disabled)	4-6 digits (0-9)	+	*#21 - *#26
Entry phone 3 keyless entry codes (factory disabled)	4-6 digits (0-9)	+	#31 - #36
* Entry phone 3 one time use keyless entry codes (factory disabled)	4-6 digits (0-9)	+	*#31 - *#36
Entry phone 4 keyless entry codes (factory disabled)	4-6 digits (0-9)	+	#41 - #46
* Entry phone 4 one time use keyless entry codes (factory disabled)	4-6 digits (0-9)	+	*#41 - *#46
Master keyless entry codes (factory disabled)	4-6 digits (0-9)	+	#51 - #56
* Master one time use keyless entry codes (factory disabled)	4-6 digits (0-9)	+	*#51 - *#56
Doorstrike 1 activation time (.5 - 99 secs, factory set to 00 = .5 secs)	2 digits (00-99)	+	#19
Doorstrike 2 activation time (.5 - 99 secs, factory set to 00 = .5 secs)	2 digits (00-99)	+	#29
Doorstrike 3 activation time (.5 - 99 secs, factory set to 00 = .5 secs)	2 digits (00-99)	+	#39
Doorstrike 4 activation time (.5 - 99 secs, factory set to 00 = .5 secs)	2 digits (00-99)	+	#49
** Auxiliary Contacts:
Auxiliary contact timing (.5 - 99 secs, factory set to 00 = .5 secs, DIP
switch 1 off)	2 digits (00-99)	+	#59
1. Entry phone triggered timed activation (factory setting, DIP switch 1
off)	1	+	#60
2. Entry phone triggered continuous activation	2	+	#60
3. Entry phone triggered ring cadence activation	3	+	#60
4. Auxiliary input triggered timed activation	4	+	#60
Maximum entry phone ring count (1 - 99 rings, factory set to 5 rings)	2 digits (01-99)	+	#61
Enable entry phone ringing (factory setting)	1	+	#62
*** Disable entry phone ringing	0	+	#62
Security code (factory set 845464)	6 digits (0-9)	+	#47
Enable entry phone Caller ID (factory setting)	*1
Disable entry phone Caller ID	*2
Entry phone calls give custom double ring cadence (factory setting)	*3
Entry phone calls give standard ring cadence	*4
Dial “9” to access an outside line	*5
Instant outside line access (factory setting, for use with private dial
tone)	*6
Enable doorstrike latching commands (factory setting)	*7
Disable doorstrike latching commands	*8
Enable entry phone identifier beeps (factory setting)	*9
Disable entry phone identifier beeps	*0
Reset all programming to factory default settings	###

*Note: A keyless entry code can be programmed for EITHER an unlimited number of uses or one time use, NOT both. There can be a maximum of 6 keyless entry codes and/or one time use keyless entry codes per entrance.

**Note: Auxiliary contact programming is only to be used if the DCH4 is in the Auxiliary Contact Mode (DIP switch 1 OFF), see DIP Switch Programming section D.

***Note: Only entry phone call waiting Caller ID will function in this mode, standard entry phone Caller ID will not.

08905107C - 4 -