MRC88 / MRAUDIO8X8 QUICK START GUIDE | 22 |
Universal Dragon™ can be installed using the included
When finished installing Universal Dragon™ double click the shortcut on the PC desktop to launch the program.
WHO AM I
Before starting a new project or doing any programming, it is highly recommended that a ‘Who Am I’ procedure be performed to confirm the firmware version of the MRC88. This will serve two purposes. One, it will confirm the connection between the PC and the MRC88 that will be required for all programming; and two, it will assure that the MRC is up to date with all of the latest features and fixes.
Figure 14 – Who Am I/MRC | Figure 15 – Firmware Page Link |
1.Connect the included DB9 Programming Cable (Xantech P/N 05913410) to a Serial Port on the PC and to the RS232 COM Port on the MRC88 Front Panel or connect a USB
2.In the Base Unit Menu, select WhoAmI, then MRC. The Who Am I? Window will appear with all of the firmware version information for the MRC and all connected keypads.
3.In the Favorites Menu, select Xantech Firmware Page. This will load the Xantech Firmware Updates Page in the web browser.
4.Compare the firmware version from Who Am I? to the version on the Firmware Updates Page. If the version on the Updates Page has a higher
08905142A