MRC88 / MRAUDIO8X8 QUICK STA RT GUIDE
08905142A
39
icon on the LCD Display and se nds IR commands programmed to the button (if a ny) to the corresponding
source and common emitter output s as well as Zone Emitter port.
7. Source 5-8 Selector Buttons. Pressing of Source Button selects the corresponding source’s Audio/Video
signal to be played in the Zone of the keypad pres sed. Pressing of the Source Button will reverse the source
icon on the LCD Display and se nds IR commands programmed to the button (if a ny) to the corresponding
source and common emitter output s as well as Zone Emitter port.
8. Vol
+. Increases zone volume and moves the Volume Bar on the LCD Display to indicate volume level (non-
programmable).
9. Vol
-. Decreases zone volume and moves the Volume Bar on the LCD Display to indicate volume level (no n-
programmable).
10. Mute. Mutes zone speaker output. Send s IR commands programmed to this button (if any) to the selected
source emitter, common emitter, and zo ne emitter outputs.
11. CH +. Sends IR commands programmed to this button to the selected source emitter, common emitter, and
zone emitter outputs.
12. CH -. Sends IR comman ds programmed to this button to the selected source emitter, commo n emitter, and
zone emitter outputs.
13. Status. Displays zone and system status. Allows access to Dynamic Zone Linking and Zone EQ/Balance
settings (non-programmable).
14. Select/Play, Stop, Pause, Rew, FF. Each send IR command s programmed to these buttons to the selected
source emitter, common emitter, and zo ne emitter outputs.