ENABLING THE XT1 DRIVER
1)Open the Project Options dialog box
2)Select the “Source Components” tab.
3)Select the “XT1” tab.
4)Click the “Enabled” check box to enable
5)In the “Port” field, make sure that “Com Port” is selected. This lets the driver know how the XT1 is connected to the MRC88m.
TELLING THE MRC88m WHICH SOURCE INPUT IS CONNECTED TO THE XT1
1)In the “Source Input” region, click the check box next to the “Connect to Source Input” text.
2)Make sure that “Source 1” is selected in the
3)Click “OK” at the bottom of the dialog box to close the “Options” dialog.
- 2 -