Xantech MRC88M quick start CONFIGURING THE MRC88m KEYPAD TO CONTROL THE XT1

CONFIGURING THE MRC88m KEYPAD TO CONTROL THE XT1

The XT1 is controlled by using the new “Metadata” Internal Commands. These new commands can be used to control the XT1, XIS100, the XMusic, and the iPort. See Figure 1 at the end of this document that describes how each Metadata internal command maps to the XT1 function.

1)Just above the Virtual Keypad (under the “Keypad” tab), select “Zone 1” from the drop-down box.

2)On the Virtual keypad, select SRC1.

3)On the right-hand portion of the Dragon window, make sure that the “Internal Commands” tab near the bottom of the window is selected.

4)On the Virtual Keypad, select the “Ç PAUSE” button.

5)In the “Internal Commands” window, select the “Metadata Up” command.

6)In the “Zone” area, select the current zone, Zone 1.

- 4 -