Xantech PA1235 installation instructions Specifications, Watts, 0.08 %

SPECIFICATIONS

Number of Channels	.....................................................................................................................................................		12
Power Output
Rated Continuous Power, Each Channel:		8 Ohms	35 Watts
All 12 channels simultaneously driven,
20 Hz to 20 kHz, at rated THD.
Short Term Continuous, Each Channel:		8 Ohms	> 55 Watts
(2 channels driven, 1 kHz, at rated THD)		4 Ohms	> 80 Watts
Bridged Power Output:		8 Ohms	> 150 Watts
	(Short Term Continuous, one pair driven @ 1 kHz, at rated THD)
Rated THD			< 0.08 %
Damping Factor (@ 50 Hz, 1/2 rated power)			> 100
S/N Ratio (A Weighted, Shorted Inputs, ref. to Rated Power)			> 100 dB
Frequency Response (@ 1 Watt, ± 3 dB)			12 Hz to 55 kHz
Input Sensitivity (@ Rated Power, stereo mode)		Input Gain (IR Controlled Setting)
		Max. ......................................................................... 0.5 V
		Default	1.0 V
		Min. ............................................................................. Off
Input Impedance		LOCAL Inputs	22 kOhms
		COMMON AUDIO BUS Inputs	70 kOhms
Power Source		120 VAC, 60 Hz (240 V Version: 240 VAC, 50 Hz)
Power Consumption		No Signal	30 Watts (0.25/0.13 A)
		12 chan @ 1/10 rated power	360 Watts (3.0/1.5 A)
		12 chan @ rated power	1090 Watts (9.1/4.6 A)
		6 chan Bridged @ 8.5 watts/chan ..	720 Watts (6.0/3.0 A)
Remote ON/OFF and CI Voltage/Current		+5 V to +30 VDC (16 mA @ +12 VDC)
Default IR Code Group (all amplifier pairs)			A0
Line Fuse Rating	120 V Version: 10 A Slow Blow 220 VAC. 240 V Version: 5 A Time-Lag 250 VAC)
Dimensions		19" (483mm) W x 5-1/4" (133mm) H x 15.5" (394mm) D
Weight			35.75 lbs (16.3kg)

3-9-01 Rev.C

	® 
16
		PA1235