Page 16Model PA435X
SPECIFICATIONS
Number of channels | 4 |
|
|
Power Output | 35 Watts at 8 Ohms |
Rated continuous power, each channel, all six channels |
|
simultaneously driven, 20 Hz to 20kHz, at rated THD |
|
|
|
Power Output | 55 Watts at 8 Ohms |
Short term continuous, each channel, 2 channels driven, | 80 Watts at 4 Ohms |
1 kHz, at rated THD |
|
Bridged Power Output | 150 Watts at 8 Ohms |
Short term continuous, one pair driven at 1 kHz, at rated THD |
|
|
|
Rated THD | < 0.08% |
|
|
Damping Factor | > 100 |
at 50 Hz, half rated power |
|
|
|
S/N Ratio | > 100 dB |
| |
|
|
Frequency Response | 12 Hz to 55 kHz |
at 1 Watt, ± 3dB |
|
|
|
Input Sensitivity | Max: 0.2 V |
at rated power, stereo mode, input gain | Default: 1.0 V |
| Minimum: 3V |
Input Impedance | Local Inputs: 22 kOhms |
| Common Audio Buss Inputs: 70kOhms |
Power Source | 120 VAC, 60 Hz |
| TMRA 35° Celsius (95° F). If this temperature is exceeded, |
| you will need to provide additional ventilation to ensure proper |
| operation. |
| 240 VAC, 50 Hz (European version) |
|
|
Power Consumption | No signal: 14 Watts |
| 4 Channels at 1/10 rated power: 105 Watts |
| 4 Channels at rated power: 420 Watts |
| 4 Channels Bridged at 465 Watts |
Remote On/Off/Mute CI1 & CI2 Voltage/Current | +5 V to +30 VDC (16 mA at +12 VDC) |
|
|
Line Fuse Rating | 120V version: 6.25A Slow Blow 250 VAC |
| 240V version: 3.15A |
Dimensions | 17” W x 4” H x 11.5” D |
| (432 mm W x 102 mm H x 293 mm D) |
Weight | 20.4 lbs (9.3 Kg) |
|
|
© 2003 Xantech Corporation
