TROUBLESHOOTING

1. POLARITY

It is a good idea to test the polarity of the speaker and wire connection. Testing the polarity confirms that positive (+) wire is connected to the positive (+) terminal on the speaker and amplifier. A reverse- polarity connection (positive (+) wire connected to negative (-) terminal) will result in poor speaker performance and possibly damage the system.

To test the polarity, take a 9 Volt battery. Connect the negative (-) terminal of the 9 Volt battery to the negative (-) wire. Then, while observing the woofer on a speaker, connect the positive (+) terminal of the 9 Volt battery to the positive (+) wire.

If the woofer on the speaker moves outwards, the wiring polarity is correct. If the woofer on the speaker moves inward, the wiring polarity is incorrect. In this situation, it is best to correct the polarity by swapping the positive (+) and negative (-) wire on back of the speaker.

2. CHANNEL CHECK

To check that the left speaker is not connected as a right speaker, you will need an amplifier or preamplifier that has BALANCE control. Turn on the system so that music is coming from the speaker system. Move the BALANCE control to the far right. The right speaker should only be producing sound. Move the BALANCE control to the far left. The left speaker should only be producing sound.

If the above case is not true, then it would be easiest to correct the problem at the equipment rack. The problem may not be at the amplifier to speaker connection. It is a good idea to check source to amplifier connection as well.

3. NO SOUND FROM SPEAKER

In the event that no sound from the speaker is heard, check the wiring or the items below.

A.Verify the correct source is playing and is selected on the receiver\amplifier end.

B.Verify mute and volume levels are correct. Verify volume control is wired properly.

C.Some receivers have A or B selector switches, verify the correct output is switched. This also applies to speaker selector switches and advanced volume controls.

D.A wire short-circuit may cause the amplifier to shut-down in protection mode.

E.Bad connecting between the source and receiver\amplifier end.

SPECIFICATIONS - OVERVIEW

XTC SERIES

XTC REFERENCE SERIES

Tweeter: Pivotable Teteron dome tweeter constructed with

Tweeter: Pivotable Titanium dome tweeter. Rear acoustic

advance neodymium magnet, fluid cooled, and rear

damping and positive rubber surround removes ringing and

acoustic damping.

achieves pure tones with low distortion.

Woofer: Durable IMG (injection molded graphite) woofer

Woofer: Premium Al/Mg (aluminum magnesium material)

for higher sensitivity and increased sound pressure levels.

woofer stays rigid during the most extreme bass notes and

Crossover: Second-order network. (12dB per octave).

the agility results in accuracy and dynamic bass response.

Crossover: Third-order network. (18dB per octave). Premium

Premium components specified and designed into the

system.

components specified and designed into the system.

 

 

 

 

 

 

08905092C

- 10 -

Page 10
Image 10
Xantech XB65W, XB8W, XB65CS, XB8C Troubleshooting Polarity, Channel Check, No Sound from Speaker, Specifications Overview

XA65CS, XB8W, XA65C, XA8C, XA65W specifications

Xantech is a well-known name in the audio-visual industry, particularly recognized for its comprehensive range of products designed to enhance the experience of home automation and commercial installations. Among the standout offerings from Xantech are the XB525C, XB8C, XB525W, XB65CS, and XA8W. Each of these products showcases advanced features and technologies that cater to diverse audio-visual requirements.

The Xantech XB525C is a high-performance audio distribution amplifier, designed to support multiple zones in a home or commercial environment. This device features five inputs and can distribute audio to multiple output zones, ensuring optimal sound quality across various spaces. With its compact design, the XB525C is easy to integrate into any existing system. The unit is equipped with adjustable level controls for each output, allowing users to set the perfect audio balance tailored to individual preferences.

Moving on to the XB8C, this component serves as a vital part of Xantech's audio control systems. It features an eight-channel distribution framework, facilitating seamless audio routing in larger setups. The XB8C is compatible with both traditional and modern audio sources, ensuring versatility in use. Its robust build, coupled with intelligent circuitry, minimizes signal degradation, which is crucial for high-fidelity audio performance, making it a favorite among audiophiles and installers alike.

The XB525W is another component of note, tailored for wireless audio applications. It utilizes Wi-Fi connectivity to allow users to stream audio effortlessly across different rooms within a home. With a user-friendly interface and compatibility with popular streaming platforms, the XB525W is ideal for modern homes embracing smart technology. Its ability to integrate into existing network systems makes it a valuable addition to any setup.

The XB65CS stands out with its built-in control system, specifically designed for commercial audio setups. This product offers easy management of audio signals and features multiple control options, including remote control capabilities. The XB65CS's durable construction ensures reliability in demanding environments, making it suitable for restaurants, retail spaces, and event venues.

Lastly, the XA8W is a robust and versatile amplifier designed for high-quality audio delivery in a variety of settings. Its lightweight design allows for easy installation while maintaining impressive power output. With a focus on efficiency, the XA8W incorporates cutting-edge energy-saving technologies, reducing environmental impact.

In summary, Xantech’s XB525C, XB8C, XB525W, XB65CS, and XA8W collectively highlight the brand's commitment to delivering innovative audio solutions that meet the demands of modern audio-visual environments. Their features, advanced technology, and user-centric designs underscore Xantech’s reputation as a leader in the industry, enabling seamless integration and exceptional performance in any audio setup.