ADVANCED APPLICATION – LARGE AREA, MULTIPLE SPEAKER SYSTEMS

Large areas such as gathering rooms or banquet halls may require more than a single pair of speakers. Multiple speakers can be connected to the same amplifier channel. This application requires careful understanding of the amplifiers capabilities.

1)Determine what the minimum speaker impedance the amplifier can handle. This should be noted on the amplifier or the amplifier’s instruction manual. Typically, most amplifiers can had a minimum of 4-ohms per speaker channel.

2)The XA and XB series speakers are 6-ohms. By connecting two 6-ohm speakers to one amplifier channel, a 3-ohm speaker load is created. For amplifiers with a 4-ohm minimum, this is an improper application that can cause damage to the amplifier.

3)The XA and XB series speakers provide a third wiring post for this type of application. Remove the yellow plastic cap to expose the “+8” wiring post. Using the “+8” wiring post will make the XA and XB series speaker 8-ohms. By connecting two 8-ohm speakers to one amplifier channel, a 4-ohm speaker load is created. For amplifiers with a 4-ohm minimum, this is an acceptable application.

The figure above shows multiple speakers connected to a single output amplifier channel by using FIM (flexible impedance matching). To make sure the impedance matches the amplifiers minimum 4- ohm specification, the “+8” post is used. The yellow cap that was once on the “+8” post is moved to the “+6” post as an added precaution.

Note: A 6-Ohm load is the optimum load for a single speaker per channel. The best sound is a result of a single 6-Ohm connection.

Be sure to verify the amplifiers minimum impedance capability.

 

 

08905092C

- 3 -

Page 2 Page 4
Page 3
Image 3
Xantech XB8W, XB65CS, XB8C, XA65W, XA8W, XA8C, XA65CS, XB525W Advanced Application Large AREA, Multiple Speaker Systems
Page 2 Page 4

XA65CS, XB8W, XA65C, XA8C, XA65W specifications

Xantech is a well-known name in the audio-visual industry, particularly recognized for its comprehensive range of products designed to enhance the experience of home automation and commercial installations. Among the standout offerings from Xantech are the XB525C, XB8C, XB525W, XB65CS, and XA8W. Each of these products showcases advanced features and technologies that cater to diverse audio-visual requirements.

The Xantech XB525C is a high-performance audio distribution amplifier, designed to support multiple zones in a home or commercial environment. This device features five inputs and can distribute audio to multiple output zones, ensuring optimal sound quality across various spaces. With its compact design, the XB525C is easy to integrate into any existing system. The unit is equipped with adjustable level controls for each output, allowing users to set the perfect audio balance tailored to individual preferences.

Moving on to the XB8C, this component serves as a vital part of Xantech's audio control systems. It features an eight-channel distribution framework, facilitating seamless audio routing in larger setups. The XB8C is compatible with both traditional and modern audio sources, ensuring versatility in use. Its robust build, coupled with intelligent circuitry, minimizes signal degradation, which is crucial for high-fidelity audio performance, making it a favorite among audiophiles and installers alike.

The XB525W is another component of note, tailored for wireless audio applications. It utilizes Wi-Fi connectivity to allow users to stream audio effortlessly across different rooms within a home. With a user-friendly interface and compatibility with popular streaming platforms, the XB525W is ideal for modern homes embracing smart technology. Its ability to integrate into existing network systems makes it a valuable addition to any setup.

The XB65CS stands out with its built-in control system, specifically designed for commercial audio setups. This product offers easy management of audio signals and features multiple control options, including remote control capabilities. The XB65CS's durable construction ensures reliability in demanding environments, making it suitable for restaurants, retail spaces, and event venues.

Lastly, the XA8W is a robust and versatile amplifier designed for high-quality audio delivery in a variety of settings. Its lightweight design allows for easy installation while maintaining impressive power output. With a focus on efficiency, the XA8W incorporates cutting-edge energy-saving technologies, reducing environmental impact.

In summary, Xantech’s XB525C, XB8C, XB525W, XB65CS, and XA8W collectively highlight the brand's commitment to delivering innovative audio solutions that meet the demands of modern audio-visual environments. Their features, advanced technology, and user-centric designs underscore Xantech’s reputation as a leader in the industry, enabling seamless integration and exceptional performance in any audio setup.
Top Page Image Contents