Manuals / Xantech / Home Audio / Speaker

Xantech XA65W, XB8W, XB65CS, XB8C, XA8W, XA8C, XA65C Requirements Speaker Placement, Requirements Wire

Models: XA65CS XB8W XA65C XA8C XA65W XB65C XB65W XA8W XB65CS XB525W XB8C XB525C

1 12
Download 12 pages 42.51 Kb
Page 4
Image 4

REQUIREMENTS – SPEAKER PLACEMENT

The best sound can be achieved by making sure the speakers are placed is the best position possible. The surface material should be similar for right and left pairs. Also, the cavity volume behind each speaker should be identical.

Placing a speaker near a corner tends to emphasize bass. Large surface areas emphasize treble. Drapes and upholstered furniture may muffle sound. Be sure that both right and left pairs are equal distance from the corners of a room and facing identical surfaces. Non-equality between the left and right speakers may result in inconsistent sound.

The objective of a well designed speaker system is how well it replicates live sound. A speaker system that can present a 3-dimensional replication as if the performer is in front of the listener presents “stereo imaging”.

The left and right channels of a speaker system are best placed 6 to 8 feet apart. The best height for the in-wall systems is where a person standing and a person sitting are within the optimum range of the tweeter. In general, the optimum height should be

4.5feet from floor to tweeter. This height covers both standing and sitting.

REQUIREMENTS – WIRE

For the best installation, using high-quality speaker wire is recommended. High-quality speaker wire is stranded. Do not use solid gauge wire (commonly used for 120VAC and 240VAC power connections).

Wire Length

Recommended Size

Up to 50 feet

16-gauge

Up to 100 feet

14-gauge

Greater than 100 feet

12-gauge

The general rule is that a heavier gauge wire is recommended for all installations, especially for long distances. Be sure to select a wire that has an easy to follow indicator (such as a white stripe or indented ridge). This will make connecting the polarity correctly an easier task.

Be sure to observe the proper polarity. The positive (+) wire must always be connected to the positive

(+)terminal and the negative (-) wire must always be connected to the negative terminal. An incorrect polarity connection will result in poor imagining and bass response.

Note: Be sure that each wire strand is completely isolated from other connections. Frayed or poorly twisted strands may cause short circuits and damage the systems equipment.

 

 

08905092C

- 4 -

Page 3 Page 5
Page 4
Image 4
Xantech XA65W, XB8W, XB65CS, XB8C, XA8W, XA8C, XA65CS, XB525W, XB65W, XB525C Requirements Speaker Placement, Requirements Wire
Page 3 Page 5

XA65CS, XB8W, XA65C, XA8C, XA65W specifications

Xantech is a well-known name in the audio-visual industry, particularly recognized for its comprehensive range of products designed to enhance the experience of home automation and commercial installations. Among the standout offerings from Xantech are the XB525C, XB8C, XB525W, XB65CS, and XA8W. Each of these products showcases advanced features and technologies that cater to diverse audio-visual requirements.

The Xantech XB525C is a high-performance audio distribution amplifier, designed to support multiple zones in a home or commercial environment. This device features five inputs and can distribute audio to multiple output zones, ensuring optimal sound quality across various spaces. With its compact design, the XB525C is easy to integrate into any existing system. The unit is equipped with adjustable level controls for each output, allowing users to set the perfect audio balance tailored to individual preferences.

Moving on to the XB8C, this component serves as a vital part of Xantech's audio control systems. It features an eight-channel distribution framework, facilitating seamless audio routing in larger setups. The XB8C is compatible with both traditional and modern audio sources, ensuring versatility in use. Its robust build, coupled with intelligent circuitry, minimizes signal degradation, which is crucial for high-fidelity audio performance, making it a favorite among audiophiles and installers alike.

The XB525W is another component of note, tailored for wireless audio applications. It utilizes Wi-Fi connectivity to allow users to stream audio effortlessly across different rooms within a home. With a user-friendly interface and compatibility with popular streaming platforms, the XB525W is ideal for modern homes embracing smart technology. Its ability to integrate into existing network systems makes it a valuable addition to any setup.

The XB65CS stands out with its built-in control system, specifically designed for commercial audio setups. This product offers easy management of audio signals and features multiple control options, including remote control capabilities. The XB65CS's durable construction ensures reliability in demanding environments, making it suitable for restaurants, retail spaces, and event venues.

Lastly, the XA8W is a robust and versatile amplifier designed for high-quality audio delivery in a variety of settings. Its lightweight design allows for easy installation while maintaining impressive power output. With a focus on efficiency, the XA8W incorporates cutting-edge energy-saving technologies, reducing environmental impact.

In summary, Xantech’s XB525C, XB8C, XB525W, XB65CS, and XA8W collectively highlight the brand's commitment to delivering innovative audio solutions that meet the demands of modern audio-visual environments. Their features, advanced technology, and user-centric designs underscore Xantech’s reputation as a leader in the industry, enabling seamless integration and exceptional performance in any audio setup.