Xantech XMusic manual Configuring Your Remote to Control Other Devices

PLAYLIST button

The playlist button can be used to jump to the playlist list in the music library. If the TV device is selected this button selects the blue text service option.

ARTIST button

The artist button can be used to jump to the artist list in the music library. If the TV device is selected this button selects the green text services option.

GENRE button

The genre button can be used to jump to the genre list in the music library. If the TV device is selected this button selects the yellow text services option.

NUMERIC (0 to 9) buttons

The numeric keys can be used as follows:

•When browsing the track list these buttons allow you specify the track you wish to play.

•When browsing the list of presets these buttons allow you to jump to a preset number.

•In the music library you may jump to an item in the list that begins with one of the letters specified at the top of each key.

•In text entry mode these keys can be used as an alphanumeric key pad (similar to a mobile phone).

If the TV device is selected the numeric buttons select which channel you wish to view.

I RANDOM (DELETE) button

The random button has the following functions:

•During playback this button toggles the random play setting on the Digital Music Server.

•In text entry mode this button can be used to delete characters.

If the TV device is selected this button switches the TV channel to the AV input.

H REPEAT (CAPS) button

The repeat button has the following functions:

•During playback this button toggles the repeat play setting on the Digital Music Server.

•In text entry mode this button can be used to toggle between upper-case and lower-case letters.

If the TV device is selected this button switches the TV between single digit and double digit channel selection.

B STOP button

During playback the stop button halts playback on the currently selected output of the Digital Music Server.

A PLAY button

The play button can be used to resume playback on the currently selected output of the Digital Music Server.

K RECORD button

The record button is an action key - on some menu screens you can use this button to begin a recording from the CD inside the unit; when managing playlists this button is used to create new playlists or add tracks to an

existing playlist, and in the music library this button is used to add your selection to the Play Queue.

DF button

When this button is pressed briefly during playback, play restarts at the beginning of the next track. When the button is held for a longer period of time the music will fast forward at high speed.

GE button

When this button is pressed briefly during playback, play restarts at the beginning of the current track. A second brief press moves to the beginning of the previous track. When the button is held for a longer period of time the music will rewind at high speed.

C PAUSE button

Press the pause button to interrupt playback temporarily.

CONFIGURING YOUR REMOTE TO CONTROL OTHER DEVICES

The TV and Amp buttons on the Digital Music Server remote control may be individually configured to control a range of televisions and amplifiers from well known manufacturers.

To configure the remote to control your television

•Press the TV and buttons simultaneously; hold them down for 1 second.

The TV button will remain lit for 20 seconds; the configuration process must be completed during this time.

•Enter the 3 digit numeric code matching the manufacturer of your television from the list in Appendix A.

•Press the TV button again.

The TV button will blink twice to indicate that the configuration has been accepted. If the TV button does not blink begin the process again, taking care to enter the number exactly as printed in the list. If the television is switched on during the configuration process, entering the correct code will cause the television to go into standby.

To configure the remote to control your amplifier.

•Press the Amp andbuttons simultaneously; hold them down for 1 second.

The Amp button will remain lit for 20 seconds; the configuration process must be completed during this time.

•Enter the 3 digit numeric code matching the manufacturer of your amplifier from the list in Appendix A.

•Press the Amp button again.

The Amp button will blink twice to indicate that the configuration has been accepted. If the Amp button does not blink begin the process again, taking care to enter the number exactly as printed in the list. If the amplifier is switched on during the configuration process, entering the correct code will cause the amplifier to go into standby.

19