Xantrex Technology 175 Using the DC Cable with Airplane Power Plug

Using the DC Cable with Airplane Power Plug

1. Plug the DC cable into the DC cable port on the

XPower inverter. Observe correct polarity. See

Figure 2.

2. Insert the airplane power plug into the 12 V

outlet.

3. Plug the device you want to operate into the

XPower inverter. See “Inverter Operation” on

page 14.

When plugging in the DC cable, ensure that the plug

aligns with the DC cable port. Failure to do so will

result in reverse polarity and a blown fuse.

Contents

Main XPower Pocket Inverter 175 ARTWORK NO. 975-0237-01-01 REV. A 2005-04-14 Owner's Guide by About Xantrex Trademarks Notice of Copyright Disclaimer Page Contents Page 1 Introduction Page 2 Important Safety Information Warnings and Cautions Page Page CAUTION: Output non-sinusoidal CAUTION Additional Safety Guidelines 3 Safety Features 4 Inverter Features Features and Accessories Figure 1 5 Using the Inverter Using the DC Cable with Cigarette Lighter Plug CAUTION: Reverse polarity damage Using the DC Cable with Airplane Power Plug CAUTION: Reverse polarity damage Page 6 Inverter Operation Operating Guidelines CAUTION Battery Operating Time Interference with Electronic Equipment Page 7 Troubleshooting 19 PROBLEM: AC product will not operate, red FAULT light ON. Replacing the Fuse Page Page 9 Warranty and Return Warran ty Page Page Page Disclaimer Product Exclusions Warning: Limitations On Use Page Return Material Authorization Policy Return Procedure Out of Warranty Service