Xantrex Technology 200 Using the Air Compressor XPower, Powerpack 400 Plus, WARNING Fire Hazard

Models: 200

1 76
Download 76 pages 49.86 Kb
Page 38
Image 38
Using the Air Compressor: XPower

Operation

WARNING: Fire hazard

The jump-start feature is designed for short term operation only—less than 4 seconds. Operating the jump-start feature for more than 4 seconds may cause damage to the unit. Allow the XPower Powerpack to cool down for at least 3 minutes after each jump-start.

8.Remove the red positive (+) clip and then the black negative (–) clip from the vehicle’s battery terminal.

9.Remove the cables from the Jump-Start Cable Port.

Important: Recharge the XPower Powerpack as soon as possible after each use. See “Recharging the XPower Powerpack Battery” on page 4–2.

Using the Air Compressor: XPower

Powerpack 400 Plus

WARNING: Fire Hazard

The compressor is designed for short term operation only.

Operating the compressor over an extended period of time will cause the compressor unit to overheat which could lead to fire. Allow the compressor to cool down for 10 minutes after each 10 minutes of continuous operation.

3-12

975-0057-01-01

Page 38
Image 38
Xantrex Technology 200 manual Using the Air Compressor XPower, Powerpack 400 Plus, WARNING Fire Hazard, WARNING Fire hazard