Xantrex Technology 200 manual Recharging the XPower Powerpack Battery, Function button

Models: 200

1 76
Download 76 pages 49.86 Kb
Page 48
Image 48
Recharging the XPower Powerpack Battery

Maintenance

s.

Function button. CAUTION

Due to inherent self-discharge, lead acid batteries must be charged at least every 3 months, especially in a warm environment. Leaving a battery in a discharged state, or not recharging every 3 months, may result in permanent battery damage and poor jump-start performance.

Manual background CAUTION

Do not attempt to recharge the XPower Powerpack battery if it is frozen. Gradually warm the frozen battery to 32 °F (0 °C) before recharging.

Recharging the XPower Powerpack Battery

To check the battery’s charge level, press the Display

Function button.

Note: Battery Charge (%) status is only accurate when the XPower Powerpack has been disconnected from all appliances and all charging sources for fifteen minutes.

You can recharge the battery using:

the fully automatic “plug-in-and-forget” AC Charger.

the DC Charging Cable to recharge from your vehicle as you drive.

a generator equipped with a regulated 12 V battery charging outlet.

a solar panel.

4-2

975-0057-01-01

Page 48
Image 48
Xantrex Technology 200 manual Recharging the XPower Powerpack Battery, Function button