Xantrex Technology 300 11

When the inverter is connected to a DC power source and the On/Standby switch is on, AC power is available at the outlet.

➂Power Light The green PWR light is on all the time when the On/Standby switch is on.

➃Fault Light The red light indicates that the inverter has shut down because of low or high battery voltage, AC overload, or excessively high temperatures.

➄Mounting Flanges Mounting flanges on the AC and DC ends allow you to mount the inverter permanently. For additional information, see “Fastening the Inverter to a Mounting Surface” on page 8.

Audible Alarm An audible alarm warns you of a high temperature shutdown or of an impending low voltage shutdown.

Fan The fan (see Figure 5) turns on when an AC load of 100 watts or larger is plugged in.

Contents

Owner’s Guide Page Page Contents Page 1 Introduction 2 Important Safety Information Warnings and Cautions Warning! Risk of fire or explosion Warning! Fire hazard Warning! Shock and fire hazard Caution! Risk of damage to equipment Caution! Risk of damage to the 300 Inverter Caution! Risk of damage to rechargeable appliances Do not use the 300 Inverter with the type of appliances just described Caution! Risk of damage due to high temperatures 3 Xantrex 300 Inverter Features Page AC Outlets 4 Connecting the 300 Inverter Choosing a Location Fastening the Inverter to a Mounting Surface Connecting the 300 Inverter to DC Power Caution! Fire hazard Caution! Damage to the 300 Inverter Warning! Corrosive materials and energy hazard Page Page Page Page Warning! Risk of damage to the 300 Inverter Disconnecting the Battery Replacing the In-LineFuse 5 Operating the 300 Inverter Page Buzzing Sound Television Interference 6 Battery Operating Time 7 Troubleshooting Page The AC load will not operate; no inverter lights are on Measured inverter output voltage is too low Battery operating time is less than expected 8 Warranty Information Returning a Product Out-of-WarrantyService Page 9 Specifications Electrical Physical Regulatory