20
High-input Voltage Shutdown If a defective battery char ging system
causes the battery voltage to rise to dangerously high levels, the Digital
Inverter shuts down automatically. The over-volta ge error code ‘E02’
will show on the digital display.
Overload Shutdown If you connect an AC load that is rated too high
(see Table 3) or a load that draws exces si v e s u rge po w e r, the Digi t al
Inverter shuts down. The overload error code ‘E03’ will show on the
digital display.
Overheating Shutdown The Digital Inverter shuts down
automatically if it exceeds it s sa f e o pe r at in g te m p era ture. The
overheating error code ‘E04’ will show on the digital display.
Shutting the inverter off• If you are going to disconnect the battery, turn the inverter off first.
• Turn the inverter off by holding the switch until the display turns
off.
XP_Digital_200-400-800 .book Page 20 Wednesday, October 26, 2005 2:51 PM