Installation and Configuration
RS232/Fiber | Fiber Optic | |
Cable | ||
Adaptor | ||
| ||
Power | Power | |
Connector | ||
Supply Cable | ||
Ethernet | ||
| ||
| Surge | |
| Protector | |
| Ethernet | |
| Cable |
Figure 2 Ethernet Kit Cable Connections
5.Connect the Ethernet cable from the computer network to the unprotected connection on the Ethernet surge protector.
6.Connect the orange cable (U1002) to the U1002 connector on the CCU board.
7.Connect the blue cable (U1001) to the U1001 connector on the CCU board. See Figure 3.
Fiber Optic
Cable
CCU
Board
Figure 3 CCU Board Cable Connections
8.Secure the cable with plastic tie wraps.
9.Connect the power connector to the power supply cable.
4 | 153553 |
For use by qualified technicians only
