Truecharge 10TB Owner’s Manual

2.0Important Safety Instructions … Before You Install the Truecharge

Incorrect installation or operation of the Truecharge may result in hazardous conditions. We urge you to pay special attention to all CAUTION and WARNING statements. CAUTION statements identify conditions or practices that may result in damage to the Truecharge or to other equipment. WARNING statements identify conditions that may result in personal injury or loss of life. Failure to follow instructions in this manual may result in personal injury and/or damage to the Truecharge.

2.1 General Safety Precautions

1.Do not expose the Truecharge to rain, snow, spray or bilge water splash.

2.All wiring must comply with local and national electrical codes. Use only the wire sizes specified in the installation instructions. Xantrex recommends having the installation wired by a certified electrician.

3.The Truecharge contains shock and energy hazards. Do not disassemble. There are no user-serviceable parts inside.

4.Disconnect all AC and DC power at its source prior to cleaning or removing the wiring cover to access wiring terminals or the internal fuse.

5.Switch off AC power before connecting or disconnecting DC wiring or battery connections.

6.Charge only 12-volt lead acid batteries. Never attempt to charge other types such as Nickel-Cadmium (Ni-Cad), or Nickel-Metal Hydride (Ni- MH) batteries. Never attempt to charge any other voltage of lead acid battery such as 6-volt or 24-volt types. These batteries may burst, causing personal injury and damage.

7.The Truecharge can only be used as a power source when it is connected to a battery.

8.Using attachments not recommended or sold by Xantrex may result in risk of fire, shock or personal injury.

9.Although the Truecharge is approved as an ignition-protected device, avoid installing it in any space containing gasoline or propane tanks, a gasoline engine or associated fuel lines and fittings.

10.Do not install the Truecharge in a zero-clearance enclosure. Overheating may result. Mount correctly and maintain the clearance around the unit, as detailed in the installation instructions.

2