Indicator Lights and Settings on the Front Panel
1–5
The indicator lights are also used to indicate error codes. See Chapter 4, “Maintenance and Troubleshooting”Table 1-1 Truecharge+ front panel
Panel
Item Description
1 Status indicator lights which indicate that batteries are charged and
ready for use or that the batteries are being charged or equalized.
2Indicator lights which show the total charging current, in amps, into
the three battery banks.
The indicator lights show:
1, 3, 5, 10, 20 A (Truecharge20+)
2, 5, 10, 20, 40 A (Truecharge 40+)
3 The recessed Equalize button is triggered manually to enter or leave
the equalization mode.
4 The Charger Mode switch from which you can select a three-stage or
two-stage charge or a 13.5 volt power supply mode to power 12 volt
loads when you don’t have a battery.
5 The battery selection switch for choosing flooded, gel or AGM
batteries.
6 The battery-temperature switch for choosing the battery temperature
for the charge. Temperature settings compensate the output voltage
for the battery temperature.
Note that a battery temperature sensor overrides the temperature
settings on the front panel.