Preparing for Installation
2–7
Tools
To mount and connect Truecharge+ you need:
pa slot screwdriver with a maximum 3/16 in wide blade for the DC
terminals
pa No. 1 Phillips screwdriver for securing the AC wiring compartment
cover
pa wire stripper
pthe manufacturer's recommended crimp tool for any crimp terminals
that are being used
Materials
You need the following material:
p3 conductor No. 14 AWG AC cable
pAppropriately sized DC cables for each battery, with suitable
connectors at the battery end
pDC fuse and disconnect or circuit breaker for each battery bank
pMounting hardware (#8 recommended), minimum 4.
pOther means to route and secure AC and DC wiring