Advanced Setup
The clock is in a
Guidelines for setting this menu item:
•Ensure the current time is set correctly in menu 10 Time Of Day Setup Menu.
•The timer function is deactivated if the 21C Grid Usage Begin h:m is the same as the 21D Grid Usage End h:m time.
•This setting only operates with the AC1 input (Grid Input).
Note: The Grid Usage Timer feature is designed to work with the SB Mode, selected under the 21A Grid Usage menu, and is enabled by setting the 21B Grid Usage Begin h:m and 21C Grid Usage End h:m times differently. If BX Mode is selected and the Grid Usage Timer is also enabled, the results cannot be guaranteed as these two features can have conflicting priorities (i.e., to use or not use grid power.)
21C Grid Usage End H:M
This menu sets the time the inverter stops using the grid to charge the batteries or power the loads. This timer is only used when SB is selected in menu 21A Grid Usage.
Guidelines for setting this menu item:
• Ensure the current time is set correctly in menu 10 Time Of Day
Setup Menu.
• The timer function is deactivated if the 21C Grid Usage Begin h:m is the same as the 21D Grid Usage End h:m time.
• This setting only operates with the AC1 input (grid input).
| Endh:m21CGridUsage |
|
| |
22 Battery Xfer (BX) Menu |
| |||
|
| This menu heading provides settings that determine the transfer levels | ||
|
| when the loads will be powered from the inverter or from the utility | ||
|
| power | ||
|
| selected in menu 21A Grid Usage. |
| |
|
| Guidelines for setting this menu item: |
| |
| (BX)Menu | • These settings only operate with the AC1 input (grid input). | ||
| • The upper and lower ranges of these settings are locked by the set | |||
| ||||
point levels in Menus 11A High Battery Cut Out VDC and | ||||
11C Low Battery Cut Out. |
| |||
|
| |||
